How to install the workstation:
1. Place the table mat flat on the work surface.
2. Connect the common point ground wire to the desk mat by snapping it into the snap on the left or right side.
3. Insert the banana plug into one of the banana jacks on the ground cord and connect the wrist strap to the common point ground cord.
4. Attach the wrist strap to the coil wire. Tip: Make sure the operator wears the wristband over bare skin.
5. Connect the common ground wire to ground. The connection to this ground point is most easily accomplished by removing the center AC outlet plate cover screw, passing the screw through the eyelet for both ground wires, and replacing the screw. The wires can be moved to the left and right of the screws so they dont block the socket.