OTCs Universal Puller for Wet-Type Sleeves removes cylinder sleeves faster than ordinary pullers because it requires very little setup time. The cone adjustment quickly positions the puller jaws snugly against the sleeve, then simply tighten the locking bar - you are ready to begin pulling the sleeve. To aid in breaking frozen sleeves loose, the included adjustable bridge is positioned on the cylinder block and then the bearing-mounted forcing nut is tightened. Next, the bridge is removed and the slide hammer assembly is attached. With a few sharp hammer blows from the 5 lb. hammer, the sleeve is pulled - an average of less than 2 minutes per cylinder in most cases. Puller does not require any special adapters to pull sleeves due to the adjustable jaw design. The adjustable jaws allow use on cylinder sleeves ranging from as small as 3 inches to as large as 6-1/2 inches in diameter. High-grade materials ensure quality performance over the lifetime of the tool. Instructions included. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.