Feature

●KEMIMOTO X3 wheel bearing greaser enables you to grease your wheel bearing without removing the hub and bearing carrier assembly, saving both time and labor. What an awesome X3 greaser tool.
●The excellent o-ring seal design of KEMIMOTO X3 wheel bearing grease tool can effectively prevent grease from seeping and wasting during use. So every drop of your grease will be delivered to the right place to make your wheel run more smoothly.
●KEMIMOTO 39mm wheel bearing greaser is made of high-quality aluminum, which is not only rust-resistant but also durable enough for long-term use.
●The X3 grease tool in the bearings will gradually run out with frequent use of your UTV. Then you can easily add grease to the wheel bearings by yourself to the wheels continue to rotate smoothly.
●KEMIMOTO x3 wheel bearing greaser is compatible with Can-am Maverick X3 & MAX Turbo RR 2024 2023 2022 2021 2020 2019 2018 2017


Description

kemimoto utv accessorieskemimoto utv accessories
KEMIMOTO X3 Wheel Bearing Grease ToolKEMIMOTO X3 Wheel Bearing Grease Tool

What? You havent grease your bearing so far?

It is well known that UTVs are little to no grease from factory.

If you own one x3 and use it regularly, it is recommended that you grease it.

After greasing, you will find that your vehicle wheel bearings stay lubricated and run smoothly real fast!

So heres the question

Do you struggle with greasing every time？

Are you getting grease everywhere every time？

The Wheel Bearing Greaser Tool can help you very much!

Fitment:

Compatible with Can Am Maverick X3 MAX XRS XDS RC Turbo R.

OE Replace #293350109.

Essential accessories for your Maverick X3

KEMIMOTO X3 Wheel Bearing Grease ToolKEMIMOTO X3 Wheel Bearing Grease Tool

2 O-RING SEAL QUICK OILING AND PREVENT LEAKAGE OF GREASE

Tips: Make sure your axle is straight when you put the wheel bearing grease in and take it out.

Applying grease to the front lip and O-ring before applying the 39mm wheel bearing grease will lift the shaft slightly and make the grease tool easier to align.

We recommend rotating the unit after each pumping to balance the grease position.

With the axle center facing down, you will need to pull up when inserting or removing the wheel.

You can then remove it more easily without the tool.

What a time saver. It should be in every riders toolbox.

Product information