Feature

●Replaces for 5hp 6hp Tecumseh Engine 932006 640084B 5285 D7N
●Fits Ariens ST504 ST524 Snow Blower
●Fits Craftsman 536.886120 5hp 22" Snow Blower
●Fits Murray 624504x4D 22 24 Dual Stage Snow Blower
●Package includes: 1 x carburetor, 1 x gasket, 2 x fuel hose,1 x fuel filter, 2 x clamps, 1 x primer bulb, 1 x Shut Off Valve


Description

H801-08H801-08

Works with Tecumseh 5hp 6hp 7hp engine

Bore diameter on the front: 20.52mm/0.8

Center to center mounting hole distance on the front: 44mm/1.73

Fuel nozzle O.D.: 7.9mm/0.31

Replaces part number 632107 632107A 640084 640084A 640084B 640105 640299 640299A 640299B

Replaces Tecumseh HS50 HSK40 HSK50 HSSK40 HSSK50 HSSK55 LH195SA LH195SP OHSK110 OHSK120 OHSK125

801-08801-08

Bore diameter on the back: 22.17mm/0.87

Center to center mounting hole distance on the back: 34mm/1.34

Primer port nozzle O.D.: 5mm/0.2

Replaces Stens 520-902

Replaces Toro 38035 38052 38054 38052C 38035C 38056

This carburetor is pre-adjusted for use. No further adjustments are required before installation.

Please pay special attention to the choke part of your carb. If the choke setup of your current carburetor appears to be different from the one we listed in current listing, you may be looking for other similar models. Check out below chart for comparison and order accordingly.

210801 210052 210086 144371 144615
Pro Chaser PC210801 Carburetor (model in current listing) Pro Chaser PC210052 Carburetor Pro Chaser PC210086 Carburetor Pro Chaser PC144371 Carburetor Pro Chaser PC144615 Carburetor
Choke Direction Auto choke. Turning clock-wise towards the same side of the fuel nozzle with teethed gear/friction stops. Auto choke with teethed gear/friction stops. Turning clock-wise away from the fuel nozzle, and stops at a right angle to the fuel nozzle when fully opened. Manual handle choke with teethed gear/friction stops. Turning clock-wise away from the fuel nozzle, and stops at a right angle to the fuel nozzle when fully opened. Vertical standup choke with teethed gear/friction stops. Bent/angled choke handle located to the other side of the fuel nozzle. Turning counter-clockwise towards the fuel nozzle, and stops at a right angle to the fuel nozzle when fully opened.
Replaces Tecumseh Part Number 632107 632107A 640084 640084A 640084B 640105 640299 640299A 640299B 640052 640054 640058 640058A 640349 632552 632557 632557A 632560 632560A 632641 640086 640086A 640092A 640092 640311 640098A 632371 632371A 631070 631070A 631074 631921 631245 631820 632615 632208 632589 632284 640129
Replaces Part Number Stens 520-902; TORO 38035 38052 38054 38052C 38035C 38056. MFG 5313 5002 5036; OREGON 50-659; STENS 520-926. Stens 520-940 056-304, Rotary 13147, MFG 1135 1471 1483.
Compatible Models Tecumseh HS50 HSK40 HSK50 HSSK40 HSSK50 HSSK55 LH195SA LH195SP OHSK110 OHSK120 OHSK125 Tecumseh LH318SA LH358SA TRX24 TRX26 TRX27 TRX32 TRS22 TRS24 TRS26 TRS27 TRS32 Tecumseh HSK600 HSK635 TH098SA TC-632557 TC-640092 TC-640092A Tecumseh H50 HSK50 H60 HSK60 H70 HSK70 Snow Thrower Blowers Tecumseh H25 H30 H35 H40 H50 engine
Adjustable Screws ✓ ✓
Choke with teethed gear/friction stops ✓ ✓ ✓ ✓ ✓
Primer Port ✓ ✓ ✓ ✓ ✓

Product information