Feature(may vary by option.)
●[Faster printing Speed]: Mono LCD request less exposure time to save your printing time
●[More Durable in Lifespan]: Run long under UV light, 10x lifespan compare with original screen
●[Easy to Upgrade]: Only takes a few minutes make your LD002R to a LD002H
●[Sturdy Packaging]: The mono LCD Screen is packaged in a sturdy box, allowing our products to be delivered in perfect conditions
●[Tips]: Dont forget to update firmware, you can find it on chitusystems website or the user manaul
[Screen Kit+3pc protect films]
[Screen Kit+5pc Protect Films]
[Screen kit for LD002R]
Description
Upgrade Kit Mono LCD Screen Replacement for Creality LD002R,6.08 Inch 2K Monochrome Screen with 1620x2560 Resolution
The Creality LD002R comes with the Sharp04 screen, which is 5.5 inches 2K RGB LCD, 2018 there are Mono LCD coming out, and it is been widely used during 2019, Phrozen sonic Mini, Anycubic Photon mono series, and ELEGOO mars 2 series. we also write an article about RGB vs Mono, you can check here.
Now, most new resin 3d printers come with Mono screens, and even with 8K level resolutions.
In General, the Mono screen has 3 advantages compared with the RGB LCD
|
|
|
|
|---|---|---|
More durable in lifespanThe mono LCD has a process optimisation, which makes the screen can running in a long term under the UV light, it is suspected to work over 2000 hours. and the RGB LCD can only work half of that. |
Higher light transmitanceThe mono screen three times higher light transmitance than RGB screen. |
Faster printing speedThe mono lcd has a better UV light transmittance, it means when you use the same resin, it takes less time to make it cure, and in the Chitubox setting you will only need exposure time around 2.5s. In RGB LCD the exposure time is about 8s~12s. Each layer save you a few seconds, if you are print large file, it is much faster. |
The original LD002R comes with the Sharp04 screen, which is a 5.5 inch RGB LCD, and our solution is almost a plug and plays kit to make your LD002R to be LD002H.
Adjust the settings on CHITUBOX
You can use the setting of LD002H profile directly after upgrading this kit,
The actual printing size will be bigger than 5.5 inches but not reach 6.08inch after modifying, please use this setting.
- Where to download the firmware?
You can Download firmware on chitu systems website.
You only need to update the .CBD file and .SH4 file.
Ask For Support
