Feature

●【No-Sharpening Cutting Head】 The cutting head is equipped with two square carbide cutters, which can be rotated to obtain a fresh and clean blade.
●【Pen Mill Shaft with Long Service Life 】pen mill shaft with 3 side blade faces slides easily into the tube, which can prolong the service life. To avoid confusion, there are clear scale on the pen mill shaft. made of stainless steel.
●【Multiple size 】The four most popular size 7mm 、“O”、27/64" 、10mm pen mill shaft.
●【Quickly Lock the Pilot shaft 】 This Positioning mark and Alignment mark can help the flat part of the pen mill shaft to be positioned under the socket set screw, so that the pen mill shaft can be firmly locked .
●【Application】 It is recommended that you use a vise (not included)to fix the pen blank when using it on the drill press. The Pen mill cutting head features a sharp, carbon steel trimmer head for squaring blanks, and the pen mill shaft can be used to remove excess glue in the pen tube and burrs.


Description

Pen Barrel Mill TrimmerPen Barrel Mill Trimmer

Pen Barrel Trimming System

This universal pen barrel trimming system includes 4 different sizes of pen mill shaftsThis universal pen barrel trimming system includes 4 different sizes of pen mill shafts : 7mm 、“O”、27/64" 、10mm , which can easily clean and remove the extra glue, bits of wood, impurities, etc. from the tubes and make the tube cut flatter.

The cutting head is equipped with two square carbide cutters, suitable for cut every material of pen blanks. Just loosen the screw, turn the cutter and lock it back in place, and a new cutting edge is available.

Features:

  • The square carbide cutter on the cutter head, when the edge of the cutter becomes dull, just turn the cutter to get a fresh cutting edge
  • Pen mill shaft with 3 cutting faces for extended life
  • Clear Size Markings 7mm 、“O”、27/64" 、10mm pen mill
  • Works Faster and easier for Pen Turners

Package Included:

  • Cutter head with 2 square carbide cutters
  • Allen wrench
  • 7mm 、“O”、27/64" 、10mm pen mill shaft

Pen Mill ShaftPen Mill Shaft

Pen Barrel Trimming System Structure Introduction

/ Cutting Head /

No-Sharpening Cutting Head pen millNo-Sharpening Cutting Head pen mill

Square Carbide Cutter Square Carbide Cutter

Pen Barrel Trimming SystemPen Barrel Trimming System

No-Sharpening Cutting Head

When the edges finally get dull, turn the cutter and lock it back in place, and a new cutting edge is available.

Sharp Square Carbide Cutter

Square Carbide Cutter :1.05 X 1.05 cm (10.5 X 10.5mm).

Rubber Protective Sleeve

Protect Square Carbide Cutter from damage.

Prevent hands from being cut.

/ Pen Mill Shaft /

Pen Mill ShaftPen Mill Shaft

Pen Mill ShaftPen Mill Shaft

Pen Mill ShaftPen Mill Shaft

Clear Size Markings

Clear Size Markings 7mm 、“O”、27/64" 、10mm.

3 Side Blade Faces

Pen mill shaft with 3 cutting faces to slide easily into the tube.

Long service life.

Quickly Lock the Pen Mill Shaft

Positioning mark and Alignment mark can help

pen mill shaft and cutting head to quickly locate and then lock.