Cleaning & Maintenance Methods:
1. Please test airbrush kit with clear water before using pigment or paint to make sure that the airbrush is not clogged to spray normally.
2. Please use the water-based makeup foundations instead of oil based makeup foundations, you need to use makeup foundations made for airbrush otherwise it will clog the nozzle. It is recommended to use the Professional Airbrush Cosmetic Makeup Foundation.
3. If the airbrush is not able to spray liquid, it may also be that the fluid control knob is too tight, please adjust the tail screw. Or it may be that the nozzle is blocked. Please remove and clean the nozzle. Please refill cup with alcohol or cleaning solvent, then block the needle cover with a finger and spray. The air flows backward into nozzle to clean the paints remained the airbrush. Please repeat it 2-3 times. After that, please wipe off the residual solvent. Dry the airbrush to avoid stains or rust, convenient for next use.
4. If the airbrush compressor can not be charged and does not work. Maybe the battery has been exhausted during use. The battery can not be started and recharged by itself, so the air compressor can only be replaced by us.
5. After continuous use of 30 minutes, the air compressor should be turned off for a few minutes to cool it. After that, the air compressor can be used again and this extends its life.
6. When using acrylic paint, please dilute with distilled water or with good quality commercial thinners specifically made for acrylic paints
7. The nozzle of this airbrush gun is only 0.3mm, so it can only spray watercolor pigments, inks and properly diluted paints. If the paint and liquid are too thick, please properly dilute it with water or thinner.(Note: The concentration of paint and thinner cannot be adjusted higher than milk)
8. After each use of this airbrush, please use clean water or cleaning solvent to clean the fluid cup and the nozzle thoroughly in time and do not let the paint become dry, so as to avoid nozzle clogging or uneven spraying.