Feature
●AFTERMARKET RV STEP BRACE - Universally compatible with most RV entry steps. Note that this RV step brace is intended for use on stable, hard, and level ground
●EASIEST AND MOST EFFICIENT WAY TO STABILIZE RV STEPS - Tired of your RV rocking every time you step in or out? This simple yet effective adjustable RV step brace is the solution. It’s easy to install, adjust, and remove as needed
●PREVENT RV STEP SAG AND PREMATURE WEAR - This center support can take the brunt of the weight and footstep impact, preventing premature sag and wear and extending the life of your RV step
●ADJUSTABLE FROM 7 5/8” TO 14” - The brace has a 3/4-inch diameter threaded rod with a 4-inch by 4-inch plate handle. It can extend the brace’s base height of 7 5/8 inches to a maximum height of 14 inches
●HEAVY-DUTY SOLID METAL CONSTRUCTION - The heavy-gauge solid steel base construction allows the brace to be an effective load-bearing column. It can withstand up to 1,000 pounds of weight even when extended to its maximum height
Description
Easy to Install RV Step Brace
Before purchasing, ensure that your RV step unit does not have braces or other structures underneath the step that can prevent the RV step brace upper plate from making proper contact with the step.
- Place the unextended RV brace under the bottom RV step. The base plate and the upper plate should lay flat and in proper contact with the ground and the step, respectively.
- Rotate the brace’s upper plate counterclockwise until it comes in contact with the RV step.
- Test the step. There should be little to no bouncing or movement at each step. Adjust as needed. Make sure to not overextend the RV step brace to where its pushing the step up.
To ensure your safety and to ensure maximum stability, do not thread the brace all the way through. Leave at least 3 rotations from the base of the brace.
For best results, you can use 2 RV Step Brace Stabilizers on each end of the bottom step. This will allow equal weight distribution on both ends.
