Feature
●Versatile & portable steps with handrails: The protable stairs with handrail could be used for rv steps, mobile home steps, travel trailer steps, hot tub steps, above ground swimming spa steps, camper steps, house to the back yard. Will help to keep balance when stepping and down, make some difference in accessibility for users.
●Handrails on both sides design: To make the steps much more safer, we attach one grab bar on each side of the stairs. The handles use shrink tube design, then firmly connected by one strong screw from the bottom. Additionally, the grab bars are screw threads connected, not only strength not change, but also can be disassembled to store easier.
●Work well for a multiple of purposes: For people with parkinsons disease, whose muscles are weak, have balance issues, bad knees support, handicapped individual,disabled and uses a cane. The step stool gives better stability entering and exiting RV, travel trailer, hot tub and mobile/ motor home, especially when your hands are full.
●Strong structure for durability: With triangular bars to stabilize the rv steps, reduce wobbling and the risk of falling during use. Thickened 2mm thickness step panel, with one lower beam to support & increase its load bearing capacity. Our rv stair rail is strong enough to withstand 400LBs, can carry the weight of two people at once.
●Easy to use portable steps: We include 3 mats to put on the steps, the mats front are with grooves to not collect water and back is non-slip PV back. Polished black is relatively easy to clean up and seems high-grade. All wrenches and screws are included and recommended to assemble with two people. Please check attached PDF manual guide on product page.
Description
RV STEPS WITH HANDRAILS.
- Up to 400LBs load bearing capacity: A square tube with a side length of 1inch was used as the support brackets, fully welded together. The step plate thickness is up to 2mm, with cross support bar to provide extra braced force. The fist and second step, back of the third step are all with triangle support bars. We ourselves have been using this rv stair railing for a long time, with a load-bearing capacity of no less than 400 pounds.
- Better stability entering and exiting RV: Provides a lot of additional stability and makes entering and exiting travel trailer much safer then the standard factory steps. Makes loading and unloading the trailer a breeze and keeps balance when entering and exiting even with hands full. Using this in place of your built in RV steps to give more step out platform and safer stairs width. if youre mostly location stable perfect for your permanently parked travel trailers.
- RV step stool with handrail on both sides: Comparing with others, we made some improvements in the design of handrails. First, each handrail can be disassembled into three parts, the grab bars are screw threads connected, not only does the strength not change, but also can be disassembled to store easier. Second, we designed handrails on both sides of the stairs. Third, use shrink tube to fix each grab bar against the step, then use strong screw to fix from its bottom. You could check and test how they work.
CORRECT STEPS MAKE ASSEMBLING MUCH EASIER.
- Step 1: Prepare the two brackets to support the step plates and find the widest step plate.
- Step 2: Install the third step plate to support brackets. Please get ALL FOUR screws locked then tighten them all together.
- Step 3: Install the second and first step plate to brackets. Install the triangle support bar to the first and second step.
- Step 4: Tighten the screw to connect the grab bars and install them on both sides. Surely, you dont have to install the grab bar, just one side or both sides is your choice.
- Step 5: (Optional)Put on the mats. The mat back is pv material, non-slip for daily use(no double sides adhesive tape included).
WARM TIP: For more assembly instruction, Please check attached PDF on the product page.
BRING CONVENIENCE AND SECURITY TO DAILY LIFE.
- Product Weight: 40LBS
- Loading Capacity: 400LBS
- Step Plate: 2mm thickness iron
- Support Brackets: 1“ square tube
- Grab Bars: φ25mm, 1.2mm thickness
- Package Content: 1* Screw wrench, 1* Hex wrench, 2* Support brackets, 2* Detachable grab bars, 3* Step plates, 3* PV Mats, 6* Triangular Bars, 6* Shorter rod screws, 18* Longer rod screws, 20*Screw Nuts.
