Feature

●1.ZQ-II bending tester is designed and manufactured by referring to GB11185 - 89 and ISO6860 - 1984 standards
●2.It is mainly used to test the coating of color paint and varnish, which is resistant to cracking or peeling off the metal plate when it is bent around the taper shaft under standard conditions.


Description

ZQ-II Conical Mandrel Tester
Product Description
Standards: ASTM D 522, D 1737; DIN 53150; ISO 1519, 6860.
The varying mandrel diameter (3.2mm- 38.1mm) stretches a coating through a gradient of distension, allowing precise determination of adhesion characteristics.
Panels up to 20.3cm and 1.6mm thickness can be tested. 
Durable sturdy stainless steel mandrel. 
Procedure
Carefully cover test panel with paper between mandrel and draw bar and clamp the probe. 
Fold the test panel around the cone by using the manually operated arm that is pivoted at the ends of the axis of the cone.
Bend uniformly at 180° within 15 seconds. 
Remove panel and examine the coating for cracks. 
Mark the point at which the cracking stops and measure the distance from the farthest end of the crack to the small end of the mandrel.
Appropriate calibration curves also permit determination of the elongation values of the paint film.
Technical Datas
Net Weight:7.5 kg
Dimension340 x 300 x 120 mm
Shipping Weight:10 kg
NOTE:
we will send the product to you as soon as possible