Specification:
Class F1
Magnetic Susceptibility: ≤0.05; Density: 7.85g/cm3
Shape: Cylinder and Flake
Material: 304 Stainless Steel
Case Size: 9.1x5.7x4.3 inch / 23x14.5x11 cm
Product Weight: 6.17 lbs / 2.8 kg
Weight Range: 1mg-1kg
Package: Aluminum Case
25PCS Weights
Instructions for using weights:
1. The weights should be kept properly and should not be placed in a humid, dusty environment.
2. The weights in the box need to be counted before and after use to avoid loss. The plastic case is very helpful to store flake weights.
3. Do not directly touch the weight with bare hands. When using the weight, use a special tool to move the weight.
4. Before use, remove the dust on the surface of the weight with a soft brush or special wipe.
5. Handled with care and taken lightly.
6. The temperature of the weights should be the same as the temperature in the laboratory.
About Calibration Weights:
Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. They are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force.
The differences between Class F1 and Class M1 Weights:
1. F1 is more precise than M1, with smaller permission error.
2. F1 uses 304 stainless steel, M1 uses 2cr13 stainless steel.
3. M1 is with adjust bar (at the bottom of the weight), F1 is without.
Package list:
25pcs weights
1 tweezer
1 cleaning cloth
1 aluminium alloy case
1 small plastic case