ADVANTAGES

---[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE] Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use.

---[Wide Range of Applications] This multi-section jack is widely used in the installation and maintenance of large and medium-sized machinery and equipment in the petroleum, chemical, electric power, pharmaceutical, metallurgical, steel, ship, bridge and other industries.

---[Multiple Options] We have 10-30T hydraulic single-section and multi-section jacks, which can meet your needs in different places. 10T and

20T jacks are suitable for CP-180 pump and 30T, 50T are suitable for CP-700 pump.

PRECAUTIONS

• Dont add partial load or overload when using, so as to avoid accidents and damage to parts.
• Please perform regular maintenance to avoid clogging or leakage affecting the use.
• There is more air in the cylinder of the new or long-term used hydraulic jack. At the beginning of use, there may be a slight sudden jump of the piston rod. The hydraulic jack can be repeatedly moved 2-3 times without load to eliminate air. The seals of the jacks that have been idle for a long time will affect the service life of the hydraulic jacks. Therefore, when this product is not applicable, it is recommended to repeat the movement 2-3 times a month without load.

What should I pay attention to?

• Due to the long transportation journey, it is NORMAL for hydraulic products to leak slightly.

• Please tighten the sealing plug when you are not using the hydraulic pump, and seal the joint with a small bag and rubber band to avoid oil leakage.

• When using hydraulic jacks, the bottom should be flat and tough. For safety in use, it is recommended to use oil-free wood, which can enlarge the pressure-bearing surface. In addition, in order to avoid sliding, iron plates CANNOT be used to lift things.

• Please lift heavy objects slightly before use to check whether there is any abnormality. After the inspection, please lift the object steadily. Do not lengthen the handle arbitrarily or operate it excessively.

• When multiple hydraulic jacks are working at the same time, someone should command them to move up and down at the same time. Two adjacent hydraulic jacks need to be supported by wooden blocks to ensure that the gap does not slide.

• When using hydraulic jacks, please always pay attention to the sealing parts and pipe joints, and ensure that they are safe and reliable.

• Hydraulic jacks are NOT suitable for use in places with acids, alkalis or corrosive gases.