Remote Sensor Please Note: - The remote control sensor is located at the right of the sound bar.
- Please use the remote right in front of the sensor to make sure the soundbar pick up the signal easily and quickly.
|
Wall Mounting - Insert the bracket into the bottom of the sound bar according to the arrow.
- The distance between two brackets of the soundbar (11.69inch)
- Mark the position and drill 2 holes in the wall.
- Insert 2wall anchors into the holes, use a hammer if necessary.
- Secure the supplied screws into the anchors and leave approx 0.1inch (2.54mm) length to hook the sound bar.
- Hang the sound bar onto the screws. Make sure they are firm and stable.
|
Optical Mode Setup Quick connection to TV - Remove the rubber protective cap on the optical cable, then connect the sound bar to the TV via the optical cable.
- After the speaker is turned on, press the M button (model) to switch the sound bar to optical input mode(Purple LED)
- Turn on the digital output and set your TV output format to PCM.
|