1. When we laminating, first evenly clamp the paper file in the middle of the laminating pouch film, and then balance the welding side into the over laminating machine (remember to enter the machine first on the welding side, and if the other sides enter first, there will be air entering). Do not use hands to pull during the process, let the laminating film automatically come out according to the speed of the laminating machine. After over laminating is completed, wait for 1-2 minutes to cool before use.

2. Please choose the appropriate laminating pouch film correctly, ensuring that the size of the laminating pouch film is at least 3mm larger than the paper on each side (equal to or greater than 3mm).

3. Due to different brands and levels of newness of laminating machines, the laminating effect may vary.

● Suggestion: First, try sealing a few sheets to set the accurate temperature.

● If there are bends or bubbles after laminating, it indicates that the temperature is too high.

● If the transparency is not enough and there is fog after plastic laminating, it indicates that the temperature is low.

● Accurate temperature can be adjusted based on such principles.