Feature
●🏎️【Conveninet Machanics Tool】The SDT 203 Smoke Leak Detector is a simple-using Smoke Machine for techs to detect the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.Inject 20-30ml oil in the machine when use it in the first time.
●🏎️【Working Principle】The Car Smoke Machine heat up test oil(mineral oil or baby oil) into smoke and blow smoke into sealed pipe system. You will find out leak point in pipe in where has smoke. Please repair the part where leakage exists.
●🏎️【Built-in Air Pump】Customers do not need to purchase additional air pumps, we use high-quality materials, after many tests, please rest assured to use. You can save more time and money
●🏎️【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak d
●🏎️【External Pressure Gauge】You can observe the barometer to more accurately determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car’s pipeline. If the barometer index keeps decreasing, your car’s pipeline leaks need to be repaired, and there is a barometer test. Leakage is faster and more accurate
●🏎️【External Flow Meter】You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing safer.
●🏎️【EVAP System Supported】 SDT 203 EVAP Smoke Tesrter Comes with EVAP adapters, SDT-203 EVAP Smoke Leak Detector can help you apply with EVAP System of all vehicles to quickly find out the leak parts. 4ft Smoke Outlet Pipe can help reach and connect perfectly.
●🏎️【Three Years Warranty and Lifelong Maintenance】For the damage caused by non-human factors, we promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
Description
SDT203 Car Smoke Leak Detector is a professional auto pipe leak detect tool. It will help us position cars motorcycles leakage on the pipe systems quickly and exactly, such as Intake System Test, Exhaust Systems Test, Cooling System Test, Crankcase system test, Car Sealing Test, Fuel Tank System Test, Turbo System Test, Various Pipe Fittings Test.
ADVANCED TECHNOLOGY
Crankcase System Test: Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.
Intake System Test: Leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.
Car Sealing Test: Poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc.
Fuel Tank System Test: When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, it can cause leaks in the fuel tank system.
Turbo Test: The leakage of coolant would cause the engine to report high water temperature.
Various Pipe Fittings Test: Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc.
EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling.
Exhaust System Test: Unpurified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.
|
|
|
|
|---|---|---|
POWERFUL AND EASY TO OPERATE
|
WIDE RANGE OF APPLICATIONS
|
LIGHTWEIGHT & PORTABLE
|
Packing List:
1pcs * SDT203 Car Smoke Leak Detector main unit
1pcs * Power Cord Clamp
1pcs * Smoke Hose
1pcs * Standard Cone Adapter
1pcs * Universal Airbag
1pcs * Hard Rubber Hose Plug
1pcs * Hook
1pcs * Funnel
1pcs * User Manual
1pcs * Packing Box
Specification
Power Supply: 12V Vehicle Battery, ＜8Amp
Output Pressure: ＜1.2bar
Flow Rate: ＜7L/Min
Length of Smoke Hose: 2.5 Meters
Length of Power Cord: 2.5 Meters
Working Cycle: 5 Min auto-stop
Overheat & Anti-frost Protection
This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device.
About Maintenance:
With longtime high temperature work, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly.
Before filling new oil, please pour out the remaining oil in the detector.
When the smoke output has water drops, please replace with new oil.
Liquid paraffin and baby oil are OK. Please fill new oil with equipped oil bottom..
Fast Smoke Output: The smoke leak detector has its own air compressor and thanks for our advanced heating technology, it can generate smoke in seconds by heating up mineral oil or baby oil.
How To Tell?
No Leaks: When the pressure gauge value remains unchanged, it means no leakage exist in the system.
Small Leaks: When the pressure gauge value drops, it indicates a small leak exist in the system.
Big Leaks: When the pressure gauge value drops and almost reaches zero, it indicates a large leak exist in the system.
How to do leak test
STEP 1: Fill 20ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.
STEP 2: Disconnect the pipe that needs to be connected with detector.
STEP 3: Connect detector with DC12V battery, turn on the power switch, and the detector starts to work.
STEP 4: In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
Caution：
When you use this Car Smoke Leak Detector for the first time, fill with 10ml oil . Please be careful NOT to beyond this range.
The testing liquid : both liquid paraffin and baby oil are OK.
Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
During the process of leak detection, please keep away from smoke-sensitive parts.
Do NOT run the detector over 8 minutes continuously. It needs interval rest.
The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
The round part of this detector has temperature, please be careful to avoid burns.