Features:
Technical Specifications
Extending Rod | Right Angle Rod | Small Hole Sensor | Curved Surface Sensor | Axe type Sensor | |
---|---|---|---|---|---|
Description | extending rod increases the depth for pickup to enter the part. extending 50mm long. | change the position of the sensor, mostly use for measure surface of particular groove. | measures flat surface, shaft ; when measure inner hole surface, the diameter of inner hole are required>5mm, depth>22mm. | to measure smooth cylindrical surface which radius is larger than 3mm, for the large radius smooth spherical surface and other surface also can obtain good approximation | measuring in grooves with a width greater than 3 mm and a depth less than 3.2mm, the distance from the stylus tip to the front edge is 1.6mm. |
Model | KS55 | KS90 | KS100 | KS110 | KS160 |
Very Small Hole Sensor | Groove Sensor | Deep Groove Sensor | 15mm Very Deep Groove Sensor | Narrow Stylus Curved Surface Sensor | |
---|---|---|---|---|---|
Description | to measure the inner surfaces of holes with radius more than 2mm | measure flat surface, grooves with width ≥2mm, depth ≤3mm, and down step with height ≤3mm, also to equipped with Measuring fixture, can measure cylindrical surface. | measure groove with width wider than 3mm and depth deeper than 10mm, or the surface roughness of step with height less than 10mm, also can used to measure the planar, cylindrical used with platform | 15mm Very Deep Groove Sensor | in grooves with a width > 1.5 mm and a depth< 7 mm. and measures steps less than 10mm in height. |
Model | KS120 | KS130 | KS131 | KS132 | KS131P |