Feature(may vary by option.)

●【50% Effort Reduced Punch】 If you have to exert too much force on your punch or it causes pain to use, especially on a bigger stack, you haven’t got the right one. AFMAT three hole punch, with the newly optimized labor-saving lever structure, can get the job done with minimum hand pressure, which is a lot less(50% LESS) than the regular paper punch you used to struggle with. For everybody, especially arthritis/carpal tunnel/hand issues sufferers, this 3 hole puncher will tremendously help.
●【40 Sheets Capacity Paper Punches】This 3 ring hole punch works like a beast punching through up to 40 sheets of 70 gsm paper at a time without a struggle or a jam(Advanced no-jam tech), which helps save an immense amount of time and in large part boosts your work efficiency. The whole operation is absolutely effortless, silent, and instantly done, and the holes punched out are always precise and clean. Try it once, you will no doubt fall in love with the beautiful clean cuts it creates.
●【Heavy Duty Metal Punch】This metal hole pouch, from sturdy metal construction and with 3 robust sharp puncher pins(clean cuts), is so heavy-duty and powerful, and can be put to heavy use and used for years even decades to come,really something that lasts, which is other 2 hole punch or small hole punch cannot compare with. Ingenious metal model in classic black and a simple fashion style is a perfect addition to your classroom, office, studio, etc.
●【Paper Guide for Perfect Alignment】 Simply load sheets there, hands down and holes coming out are consistently aligned due to the adjustable paper guide that adapts to different paper length, and the end stopper right where to put the paper against, giving paper the same location of holes each and every time. Never will you have to adjust and readjust the lineup of thicker stacks of paper with this 3 hole punch heavy duty model.
●【Hole Punches W/ Large Chip Tray】To make hole punching hassle-free, a punch should be labor-saving, jam-free, capable of punching more at a time, easy to empty and also rarely need to empty so as to allow you to focus on punching instead of frequent dumping, that’s the way this large hole punch works. Warm tips: If the puncher pins stuck (really rare event) due to the punching slot full of cutouts, simply open the whole bottom cover to remove the jammed pieces.

[Gray]

[Blue]

[Black]

[Green]

Description

Heavy Duty 3 Hole Punch Can Deal with 40 Sheets of 70 gsm Paper Easily!

Description:

A tool must be something that really works and helps, AFMAT heavy-duty metal punch is such a piece powerful enough to punch through a thick stack(≤40 sheets 70gsm paper) in a flash for its sharp puncher pins(Very beautiful clean cuts and rapid motion), with minimal hand pressure taken only for its 50% EFFORT REDUCED lever principle design, no jams, no missed holes, and no much effort taken. Quite a speedy chore for you to have the loose pages organized into a binder for a tidy countertop and a quick-access page.

Think back did your previous punches exert too much of your force to punch, especially through a thicker stack? Try this paper puncher, you’ll never have to stand up from seat using both hands to pound sheets down, just a little bit effort, often times, a simple thumb press is enough.


40-sheet Capacity Being capable of handling a large stack of paper up to 40 sheets of 70 gsm paper at one time makes puncher a real time saver for teachers to hole punch a whole class set of papers at a time, and for everybody who needs a speedy chore.	50% EFFORT REDUCED Punch The paper hole puncher easily goes through many sheets yet takes only a little bit force to finish one stroke. One hand operation usually fills the bill, generally, one finger operation is enough. You don’t have to stand up from seat and break the sweat pushing down on the punch with hand pain caused.	Paper Guide The paper guide on the left helps line up a stack of paper and ensures that the alignment of the holes is pretty consistent. The paper guide is not fixed, but can be adjusted to adapt to varied paper length.


Solid Metal Construction These hole punchers, constructed from sheer metal body(The bottom cover is sturdy plastic) and equipped with 3 robust sharp puncher pins, are so heavy-duty and sturdy, and can be put to heavy use and used for years even decades to come.	Rapid Motion & Clean Cut This heavy-duty hole punch really gets the job done exactly the way it’s supposed to: super fast operation and precise cut without a burr. Moreover, the sharp angled puncher pins(not flat dull pins) make the job done even faster.	Large Punch W/ Large Chip Tray This paper hole punch features an ultra large chip tray, the whole bottom serves as chip storage tray that really takes long before needing a cleanup, which saves time from frequent dumpings.