CONTENTS
Insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure
Attach the slide hammer and yank the weight towards the handle to give an extra snap of force
Repeat action until the bearing or bushing has been removed.
Collet Sizes: 8-11mm, 12-17mm, 18-23mm, 24-29mm, 30-34mm, 34-38mm, 39-43mm, 44-48mm, 49-53mm, and 54-58mm.
Screw Adaptor Sizes: M10x1.5p, M10x1.5p/M8x1.25p, M10x1.5p/M6x1.0p.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet.
Tighten the nut on the top of the assembly to slowly pull the bearing out of place.
Use this tool to finish the job without damaging the removed parts.