Operation:
Remove all the packing before use. Then clean the spray nozzle to make sure the nozzle is without any hindrance.
Place the machine uprightly in a horizontal surface, then loose the cap of liquid tank to pour into the recommended or other high-quality water-based snow liquid.
Make sure the Power Switch on rear side of the unit is in the "OFF" position.
Plug the remote control through the "REMOTE CONTROL " connector on rear side of the unit.
Plug the Power Cord into a grounded electrical outlet consistent with the units rated voltage.
Turn the Power Switch to the "ON" position. And the indicator on remote illuminates.
Allow the unit to warm-up about 4-5 minutes.
Press the button on remote for emission and release for pause.
If you want the machine spray snowflake continuously, please hold the button. Buttons "A,B,C,D" are the same.
To turn off the snow Machine, switch the Power Switch at the rear of the unit to the "OFF" position.
Note: (Do not add too much liquid to avoid the liquid spill out from tank, it will damage the machine)
Description: This is a robust, high pressure, large output snow machine that produces abundant amounts of snow that are capable of blowing considerable distances. The durable motor is enclosed in rubber cushions within the case for high output and low vibration. Hanging bracket comes standard for ease of trussing and installation. This model is light and portable machine which are perfect for club effects, movie sets and stage settings where quiet scenes and lifelike snow effect are demanded. Let the snow fall all season round!