Feature

●The Slurry Test Kit Model is a field portable kit designed for measuring the properties of slurries formulated in the field.
●This kit allows laboratory quality measurements of viscosity, specific gravity/density, and sand content;Sand Content Kit This test kit measures the percentage of sand (by volume) suspended within the drilling fluid.
●All testing instruments are contained in a aluminium carrying case;The case is durable, compact, and provides convenient storage.
●Marsh Funnel and Viscosity Cup The Marsh Funnel and Viscosity Cup give an accurate measure of the drilling fluid viscosity.


Description

234234

This tester is made in accordance with industry standards and has a wide range of applicability，Mud Hydrometer can be used for mud analysis and weight measurement in highway construction site, bridge, mixing station or laboratory.

123123

include：This kit is a three piece mud set, including Mud Hydrometer, mud viscometer and sand content meter. The kit can be used for laboratory measurements of viscosity, specific gravity / density and sand content.

1. The mud hydrometer is made of engineering plastic sample cup and has good corrosion resistance. The unit is g / mm³.

Measurement range: 0.96-3 g /cm³,

Measurement accuracy: 0.01 g / cm³,

Mud cup capacity: 140cm³ .

2. Mud Viscometer: Mud viscometer is suitable for measuring the viscosity of mud in well sites and laboratories. It is calculated by the time required for 500mm3 mud to flow out of the viscometer, in seconds.The diameter of the outlet pipe hole is 5mm and the length is 100mm

3. sand content meter: Sand content meter is determined by the change of mud volume after filtration through screen, expressed as a percentage. Filter mesh specification: 200 mesh;

calibration:

To check whether the instrument is accurate, the mud cup can be filled with distilled water. If the specific gravity measured in the same way is 1, the meter is accurate.If the result is not 1, then the balance cylinder cover of the hydrometer can be unscrewed to increase or decrease the metal particles in the cylinder so that the specific gravity measured is 1.