Feature(may vary by option.)

●Type:PG7, Single Hole; Cable Range: 3mm-6.5mm/0.12inch-0.26inch; Thread Diameter: 12.5mm / 0.49" ; Thread Length: 9mm / 0.35".
●Cable Glands provide strain relief to cables through an extended spiral cable gland guard.
●Cable joints are made of nylon plastic, anti-loose structure, reliable connection and long service life.
●Can be inserted directly and easily tightened without disassembly. It consists of a lock nut, valve body, seal, strain relief and sealing nut.
●Great accessory for cable fixing, wiring, mechanical control box, switchboard, electrical appliances, etc. .

[PG7]




[PG11]




[PG9]





Description

cable glandcable gland

  • The clamping part is specially designed with strong pulling force and will not cause damage to the cable. After using the O-ring, tighten it to achieve IP68 waterproofing.
  • There is no need to disassemble the fixed head, and the cable can be directly threaded and tightened.

Cable glandCable gland

Cable glandCable gland

Cable glandCable gland

Clearly Marked Model

Each gland is marked with clearly model, this mark is the thread size of this joint. This mark is designed for matching hole of junction box or other device.

IP68 Rated Water Resistant

Come with inner rubber seal and precise sealing nut, to ensure great feature of waterproof.

with Strain Relief

Special design of strain relief, strong stretching resistance, better to protect cable from breaking.

cable glandcable gland

Covered Most Type of Waterproof Cable Gland

  • M Series: are Metric Joints(M as the First Alphabet)

Size from M12 to M63, these connectors are with metric thread size, just compatible with metric thread mounting hole.

  • PG Series: PG as the Front Alphabet

Size from PG7 to PG63, these sizes of adapters are suitable for your PG series thread mounting hole.

measure mounting holemeasure mounting hole

cable diametercable diameter

installinstall

cable glandcable gland

Step 1 of Installation

Make sure the cable glands outerside thread size match to the mounting hole diameter.

Step 2 of Installation

Ensure your wire hole size of joint fit the outer diameter of cable.

Step 3 of Installation

Install the adapter to your junction box or other equipment.

Step 4 of Installation

Fit cable and thread tight.