Feature
●3 RELAYS IN 1: Control 3 dry contact relays independently with one MultiRelay. Connect an optional wall switch for manual on/off control (dry contact only, NO voltage on the input side) or use your Z-Wave hub (required, sold separately) for wireless control and automation. Your smart speaker is NOT a Z-Wave hub. Does NOT fully work with Wink or Z-Wave alarm panels like Ring, Vivint, or Alarm.com (R1 control only). Custom edge driver required for SmartThings, go to Zooz support page for details.
●VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), commercial garage doors at your business, gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A.
●DIY INSTALLATION: Power it with a standard USB C cable and a 5V power supply (do NOT use USB chargers or Apple accessories) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V! Do NOT apply Voltage to the input (switch) terminals!
●RELIABLE Z-WAVE: Comes with the latest S2 security and a powerful Z-Wave Plus signal repeater to boost your network. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.
●HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. Works best with the Z-Box Hub. It was tested to work well with Hubitat, Home Assistant, and on SmartThings with a custom device driver (please go to Zooz support page for details). ADT Pulse, Vivint, Wink, and Ring all offer partial control (one relay or all at once instead of individual control for the relays).
Description
Zooz Z-Wave Plus MultiRelay
Triple Dry Contact Relay
The Zooz MultiRelay combines two 15 A relays and one 20 A relay, all dry contact so you decide if you connect a low Voltage or high Voltage device on the output side. The relays accept load running on 0 to 240 V.
This device is the answer if you want to control 3 garage doors or zones for your sprinkler or landscape lighting system with a single unit.
Zooz created dedicated apps for SmartThings and Hubitat hubs that make this versatile device more intuitive to use in specific use cases. Got to their support portal for more information.
How the switch inputs work
The switch inputs on the MultiRelay are fixed to the relay outputs and accept dry contact connections only. That means youre not able to separate input monitoring from output control on this model. You cannot apply any Voltage to the switch / input side either. If you need this functionality, look for the Zooz Universal Relay ZEN17 model.
Power Specs
Output Relays
Each load can run on its own power source, independent of the other relays and the MultiRelay device itself.
Refer to the diagrams in the manual and Zooz support portal when wiring your MultiRelay.
Switch Inputs
Use simple on/off or momentary switches only. Never connect any Voltage to the Switch input terminals on your MultiRelay.
Power Supply
Your MultiRelay can be powered by either 12-24 V or a USB C plug (power supply is not included but the device comes with a USB cable).
In both cases you’ll need a standard 1 A power adapter to plug into a standard 120 V receptacle or power source.
Do NOT power the device with laptop / tablet chargers, they need a large load to activate. Do NOT use power banks or batteries to power the MultiRelay.