Feature
●【Easy to observe】The supernatural device has 5 colored LED lights for distinguishing different frequencies, which is very convenient to use both day and night
●【Easy to carry】Small and flexible Ghost Hunter device that will not feel uncomfortable in your pocket, size and weight - 5.75" (L) x 2.25" (W) x 1" (H); 6 oz
●【OPERATION】Hold the EMF meter on the switch with your thumb, point it at the EMF source, and press and hold the switch (a brief blink of the LED will appear) and the LED will indicate the EMF range for that level
●【Ghost Hunting】This paranormal device can detect the strength of magnetic fields at home, in life and at work, and is an essential tool for paranormal enthusiasts
●【Detection Range】EMF meters can detect magnetic field strengths from 50 Hz to 20,000 Hz with an error of less than 5%
Description
There are 5LEDs, each represents a field strength range as follows:
（1）The 1st Light detects a Normal EMF field, what is always around us.The range is between 0 to 1.5 mG
（2）The 2nd Light (GREEN) detects a Low Level EMF,which range is between 1.5 to 2.5 mG.
（3）The 3rd Light (YELLOW) detects a Mid Level EMF in the range between 2.5 to 10 mG.
（4）The 4th Light (ORANGE) detects a High Level EMF field in the range between 10 to 20 mG
（5）The 5th Light (RED) detects an Extremely High EMF Range of 20+ mG
SPECIFICATIONS:
Detection Range -- 0 to 20+ milliGauss
Detection Frequency - 50/60 Hz (50 to 1000 H- ELF) (1000 t 20,000 Hz- VLF)
Accuracy - 5%(typical)
Operating Temperature - 0 to 120 Degrees F (-18 to 49C)
Battery Requirements --- 9 Volt
batterySize & Weight- 5.75"(L)x 2.25"(W)x 1"(H);6 ounces
|
|
|
|
|---|---|---|
What is EMF?Electro Magnetic Fields (EMF) emissions are created whenever electrical power flows through aheard, but they are present in andwire,conductor or appliance; they can not be seen,felt or laround all electric lines and devices. EMF emissions are measured in units called milliGauss-mG). The strength of the EMF can vary and is measurable by use of this K-Il EMF Meter. |
Why Measure EMF?EMF emissions are recognized as an environmental agent that are a potential threat to publichealth.Some scientific evidence suggests links of the biological effects of EMF to childhoodeukemia, brain cancer,miscarriages and fetal abnormalities. We are exposed to EMF at home,inthe workplace and even outdoors everyday. |
What Levels are Safe?Many studies have determined that the relationship between field strength and health risks alsoinvolves other factors which make it impossible to assign exact danger level limits based only onfield strength.Though the US government has not yet provided exact danger level limits, other countries andmany states have already set standards for exposure based on field strengths. |
Helptul Hints:
Record the readings on the enclosed Exposure Log, repeat periodically, since fields canchange in strengthIf the GREEN LED(Normal) doesnt light,the battery is low- To change battery remove the two screws, replace 9V battery.
OPERATION：
- 1) Hold the EMF METER with your thumb on the switch
- 2) Point it toward the EMF source, then depress and hold down the switch (a short flash of theLEDs will occur)
- 3) The LED will indicate the range of the EMF at that level
- 4) Moving the device from side to side or rotating it may change the reading; the highest readingis most accurate
- 5) Move closer or further away to the EMF source to determine the "Normal" zone, as indicatedby the Green LED