[1]

[4]

Package inlcuded:

0-2A Current and 0-30V voltage collector（Please select the version you need）

Description:

Power supply voltage: DC 8-25V(12V recommended);

Operating current: 8-13MA;

MODBUS RTU protocol: 03 read command, 06/16 write command.

Serial port Baud rate: 1200 2400 9600(default) 19200 38400 57600 115200 ,N/E/O,8,1;

By modifying the RS485 address, up to 247 modules can be cascaded (more than 16 please use R485 repeater);

Voltage and current values can be read;

Current measurement range: 0~1A, 0~2A, and 0~5A. It is recommended to select a version with a smaller range within the range that meets the measurement;

Voltage measurement range: 0~30V;

Measurement accuracy: 1%. If the read value is too different from the actual value, recalibrate

Size: 72X 47 X 12MM(only board),87X 50X 37MM(with case)

Weight: 23g(board only),68g(with case)

Note:

This product is used to collect small current signals from time to time. If you need a 4-20MA signal collector, please choose the following products: N4AIA04 N46IB02 N43IC04

Note: The module will restore factory settings and restart automatically after 5 seconds of shorting the RES port.

MODBUS RTU protocol please refer to : N4VIA02 Modbus RTU