Feature(may vary by option.)

●Adaptation system: Driveway Gate Exit Wand Sensor Compatible with most Mighty Mule, Ghost Controls, Lift Master door opening systems. It supports 3rd party door operators with 12 - 24 VDC or 12 - 24VAC accessory power supplied by any control board and has normal open and dry contact signal inputs.
●Automatic induction: Automatic Gate Exit Sensor, By sensing the change of the earths magnetic field caused by the movement of the vehicle, the door can be opened automatically without manual remote control, freeing hands and reducing trouble, suitable for farm, residential or commercial use.
●Installation method: Vehicle Exit Sensor dig a hole approximately 2 inches deep and 24 inches long within 2 feet and parallel to the edge of the driveway. Next, dig a trench from this hole to a spot under the gate opener control box to run the cable from the WAND to the control box. Size of the trench is related to the size of the PVC conduit. Keep the WAND and the cable uncovered before the function has been tested 0K. Wiring the WAND to gate openers. wiring the WAND to GIANT swing gate opener.
●Products include: 1 WAND sensor with 50 ft 5-core cable 1 range adjustment board 1 detailed manual
●Perfect experience: If you are not sure about the fit or have any questions during the installation process, you can contact us. We provide 12-month warranty service and free return and exchange service.

[Gate Exit Wand]





Description

22
33

installation method

•Firstly please ensure the distance from the wand to the gate full open position is more than 25 ft.

•Secondly please be noted that the radius of the sense range of the wand is 2-6 ft.,so please install the wand near the driveway as much as possible to ensure the wand can sense the vehicle past.

•Thirdly please be noted that you should remain 5 feet long cable for connecting from ground to control board, that means the distance from the wand to the control box should not exceed 45 feet.

•You can determine the place to install the wand according to above three points

Why choose us

44

55

66

77

Definition of the 5 —core cable:

RED -+lnput Voltage (+) GREEN —Ground/Common (-) BLACK *Relays Common BLUE —Relays Normally Open YELLOW —Range adjustment potentiometer (POT)

Range adjustment board

Limit the sensing range of the wand, distinguish cars from other metal objects, and prevent accidental opening of doors.

Good signal sensing

It will not reduce the signal due to the speed or the size of the vehicle, even in rainy days, it has a good signal sensing.

No manual control required

When your car enters the sensing range, the door will automatically open, freeing your hands, no need to stop to open the door remotely.

Driveway Gate Exit Wand Sensor Automatic Electric Gate Lock
Driveway Gate Exit Wand Automatic Electric Gate Lock
Function used for induction gate lock
voltage 12-24V 12-24V