Feature(may vary by option.)

●【Auto-sensing】Our sensors no longer require a remote control or keypad button to trigger your driveway gate openers. Just drive past the buried wand and the doors will open for you and your guests.
●【Compatibility】Our Exit Wand Compatible with most brands Gate Opener by providing hands free operation of your gate. The gate opens automatically when the wand senses the vehicle moving past. Our Exit Wand is comprised of two elements: the WAND with 5-core cable, range adjustment board for gate openers.
●【Upgraded version】When the vehicle approach within 12 ft range, the exit wand sensor will detect and activate gate opener system to open the gate.and our device has a range adjustment board to prevent false gate opening by lawn moves and other metallic objects.
●【Easy to install】Easy installation without wire between remote and receiver, and not trenching required. It could be installed along the driveway on the inside of your property.
●【Satisfied guarantee】 For any reason you are not satisfied with your purchase, please feel free to contact us to get replacement or full refund, no questions asked.

[Black]





Description

Compatible with most brands Gate Opener by providing hands free operation of your gateCompatible with most brands Gate Opener by providing hands free operation of your gate

Automatic Gate Opener Sensor

  • Our Exit Wand Compatible with most brands Gate Opener by providing hands free operation of your gate

Vehicle Exit Sensor

Automatic Gate Opener Sensor Car Vehicle Exit WandAutomatic Gate Opener Sensor Car Vehicle Exit Wand

  • The exit wand is an electromagnetic sensor that detects metal mass in motion providing a 12 foot radius of detection that allows hands free exit from automatic gate operators.
  • When the vehicle approach within 12 ft range, the exit wand sensor will detect and activate gate opener system to open the gate.and our device has a range adjustment board to prevent false gate opening by lawn moves and other metallic objects.

Installation method:

  1. Dig a hole approximately 2 inches deep and 24 inches long within 2 feet and parallel to the edge of the driveway.
  2. Dig a trench from this hole to a spot under the gate opener control box to run the cable from the WAND to the control box. Size of the trench is related to the size of the PVC conduit. Keep the WAND and the cable uncovered before the function has been tested 0K.
  3. Wiring the WAND to gate openers. wiring the WAND to GIANT swing gate opener.

Package includes:

  • 1 WAND sensor with 50 ft 5-core cable
  • 1 range adjustment board
  • 1 technical manual

Model No. EW-01
5-core cable length 15 meter
Car moving speed 8km/h
Material Metal,plastic
Compatible Auto gate opener
Voltage 12-24V DC
Feature Hand-free open gate

Automatic Gate Opener System Automatic Sensor

wiring the wand to giant sliding gate openerwiring the wand to giant sliding gate opener
Definition of the 5 –core cable:Definition of the 5 –core cable:

Definition of the 5 –core cable:

  • RED →Input Voltage (+)
  • GREEN →Ground/Common (-)
  • BLACK →Relay’s Common
  • BLUE →Relay’s Normally Open
  • YELLOW →Range adjustment protectiometer (POT)

Package includes:

  • 1 WAND sensor with 50 ft 5-core cable
  • 1 range adjustment board
  • 1 technical manual

Trouble Shooting

If the WAND is not working:

  • Make sure all connections are correct.
  • Make sure the Range Adjustment is set at maximum range.
  • Disconnect the power to the WAND.
  • Test the WAND to verify that it is working properly.
  • Reconnect the power to the WAND and make sure that no metal object or vehicle is moving around the WAND for 60 seconds while its calibrating.

Note: The part is not sponsored or endorsed by, or affiliated with the brands it fits, including Mighty Mule Ghost Controls