Feature

●EFFECTIVE MIXING AND AGITATION – 4Spray tank mixing agitation nozzles are designed to convert high fluid input velocity into a low pressure zone that induces surrounding liquid in the tank to enter into the nozzle and recirculate, thus effectively mixing the tank contents
●ECONOMICAL TO OPERATE – The amount of fluid that exits the nozzle is three to five times the amount of fluid that is pumped. This multiplier effect allows greater mixing efficiency while using smaller pumping capacity in open or closed tanks
●MINIMAL MAINTENANCE & CLOG RESISTANT – 4Spray tank mixing agitation nozzles require minimal maintenance with proven results. With no moving parts, our eductors are inherently clog resistant for reducing required maintenance and maximizing flow
●IMMEDIATE AND CONTINUOUS MIXING – Our eductor design allows the fresh feed to be supplied to the nozzle inlet rather than recycling it from the tank. This allows immediate mixing of the fresh feed with the contents of the tank, and then continuous mixing as the exit jet propagates downstream
●TOLERATES TEMPERATURES UP TO 95° C – 4Spray’s glass reinforced polypropylene plastic tank mixing nozzles are a value-based product that allows you to mix fluids with temperatures up to 95° C without thermal breakdown


Description

4Spray’s Eductor Tank Mixing Agitation Nozzles are designed to convert high input fluid velocity into low pressure recirculation for effective mixing and agitation. The amount of fluid that exits the nozzle is three to five times the amount of fluid pumped. Our nozzles require minimal maintenance and are inherently clog-resistant for immediate and continuous mixing at temperatures up to 95° CWhat Do Eductor Tank Mixing Agitation Nozzles Do?Tank mixing is necessary to keep contents and solutions thoroughly mixed, proper chemical/biological reactions, homogenization of products, sediment build-up prevention, proper draining/pumping, thermal stratification prevention and bacterial growth avoidance.4Spray tank mixing nozzles greatly reduce the complexity, capital cost, and maintenance requirements of any system by utilizing a pump and submerged spray nozzles, in place of conventional mechanical components, to mix immiscible liquids or solids that need to be kept suspended.Common Applications for Tank Mixing NozzlesWaste water treatment plantsOil and gas storage tanksDrinking water holding tanks and reservoirsAerobic & anaerobic digestersHomogenize tank contents when pumping/drainingSweep sludge & sediment from tank bottomsBlending ethanol and bio-dieselParticulate/solid suspensionTransport tankersChemical injection/mixingAcid/chemical storage tanksSlurry mixing/holding tanksLake/river water inletsSteam/air injectionAquarium and Aquatic usePlating tanks, Cleaning tanksPhosphating tanksE-coat tanksFertilizer tanksPulp tanksSludge tanksPaint boothsAnodizing tanksCooling towers and decorative fountains4Spray PPL tank mixing nozzles are available in sizes from 1/4 inch to 1.5 inch.