3 Steps,15 Minutes.
Step 1 Build a preliminary framework as shown above.
a. Match 20 T-screws and Hexagon Screw Caps (T-screw and screw cap do not need to be tightened). The last 2 T-screws will be used to secure the aluminum column.
- 4 T-screw combinations for Step1, 4 combinations for Step 2, 8 combinations for Step 3, and 4 combinations for Step 4.
b. Pass the prepared T-screw Combination through the Aluminum Corner and use the Hexagonal Wrench to securely fasten the Screw in the Aluminum Tube groove. And then build a preliminary framework as shown above.
Step 2 Assemble wire routing parts.
Match 2 Orbital Screw Caps and Circle Screws, then put them in the groove and spin them.
Step 3 Assemble the yarn holder.
Put the Aluminum Column and the extra 2 T-screw into the Aluminum Tube groove and rotate to fix it. (Aluminum columns are used to secure the tufted yarn.)
- Tips: If you encounter any obstacles when installed or any other questions, please feel free to contact NODOCA-SUPPORT via your order page, and we will assist you solved the problems :)