Feature

●The Ramps1.6 controller board is changed the original plug-in MOS tube to patch-type MOS tube. Design of Pololu plate pin sockets can be easily replaced or removed for future designs.
●Applied to 5 Pololu stepper drive board, the LED will light when the heater has output, it can be extended to LCD and other parts, choose 2 motors to connect to Z Prusa Mendell.
●Heater and fan MOSFET outputs and 3 thermistor interfaces, 5A additional security and component protection fusion. Simple and convenient Connection, larger power than Ramps 1.5/1.4, Better Heat Dissipation with heat sink.
●Incorporating 5A additional security and component protection, heated bed controls additional 11A fuse.
●Servo connectors are used for connecting limit stops, motors and light-emitting diodes. These connectors are gold-plated and have a rated current of 3A, which is very compact.


Description

Features:

Expand to control accessories.

I2C and SPI pins are available for future expansion.

Added on SD card - now available by Kliment - Sd Ramps.

The features of multiple extended interface and replaceable parts make RAMPS1.6 become a control board with powerful upgrade capability and scalable modularity.

The controller board can be used when the pins on the back of the board are connected to the Mega and the front is connected to stepper motor drives.

The structure almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors, which more simple and convenient to connect, also will not be burnt easily.

Ramps 1.6 have a good heat sink above MOS tube in order to give a better function to heat dissipation .

the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W.

Voltage: 12V

Power: 270W

Patch MOS Tube: B55NF06

Support Motor Drivers: Support A4988,DRV8825 and other motor drivers(support five motor drivers Simultaneously)

Size: 10.16 x 6 x 2.83cm

Weight: 68.3g

Package :

2 x Ramps1.6 3D Control Board

2x Heat sink