Feature

●【Professional Design】Designed for FDM printers that do not have a wireless transmission module. Our Wifi box simplifies operation by wirelessly transferring slice data from the computer to the printers. The module can only be used in the following three slicing software Prusaslicer ,Ultimaker Cura &OrcaSlicer.
●【Easy to use】No power required. Just plug one cable into the printers micro card slot. No need to update firmware and no need to disassemble printer.
●【High-speed】1.8MB/S, faster than similar products, MD5 check slicing data integrity. You can manage slicing data on the computer via a WEB management user interface.
●【High Efficiency】Avoid printing failures caused by lost files, damaged memory cards, incomplete files, etc. Multiple printers can be managed on one computer.
●【Warranty】One-year warranty. Any problem please contact us via Amazon message.


Description

1232112321

  • Design for FDM 3D printer without wireless transmission module.(Use in microSD card printer only)
  • Runing on windows 8/10/11 & macOS.
  • Prusaslicer & Ultimaker Cura(5.0)

22

  • New design for FDM printer
  • High speed (1.8M/S)
  • MD5 integrity check
  • Easy to use, Plug in and it works
  • No need to update firmware
  • No need to disassemble printer.
  • Use the web management page to delete and update files.

12341234

Working Principle

  1. Use a smartphone to set up the wifibox and connect it to the router.
  2. Install the plug-in on the slicing software on your computer.
  3. Slice the model and send files to the microSD card wirelessly.
  4. WIFIBOX will Check file integrity with MD5.
  5. Now you can control the printer to start printing.

321321

Note：

  1. Only microSD card slot FDM printer use.
  2. Only use in 2.4GHz WIFI.
  3. Wi-Fi Box can only transmit files wirelessly and cannot remotely control the printer.
  4. The Wi-Fi Box does not have built-in memory, please insert a microSD card(up to 32 GB).