Introduction
* The Digital Fruit Sclerometer has advantages of high precision,easy operation and carry.It can test fruit like apple, pears.
Characteristics:
* Standard fruit hardness unit display:kgf/cm2
* The battery has over-load protection in case of short circuit and leakage of electricity .It also can tell you when the battery is running low.It adopt the 3.7V lithium battery and auto shut off if no operation in 10 minutes.
* Two test mode:Peak hold and Real-time;
Technical Specifications
* Model: Digital Fruit Hardness Tester
* Measurement Range: 0.4~30kgf/cm2 (×105 Pa)
* Load scale value: 0.01kgf/cm2
* Precision:±1%
* Pressure needle diameter: Ø7.9mm
* Depth of pressure needle: 10mm
* Power: 3.7V lithium battery
* Charging time: 4~6 hours
* Continuous usage time of battery:About 10 hours
* Battery life: ≥300times
* Charger: Input: AC 220V 50/60HZ; Output: DC 5V 1000mA
* Stability: Temperature drift: 0.2uV/℃(0-60℃)
* Zero temperature drift: ≤ 0.1%/8 hour/FS
* Work temperature: 5℃~35℃
* Transport temperature: 0℃~60℃
* Relative humidity: 15%~80%RH
* Work conditions: No focus ,Non-corrosive in surroundings
* Net weight: About 260g
* Size:160mm×71mm×35mm
================================================================
Four,Button function
OFF/ON
(start up ,shut down key):When press this key,turn on the power,appear measuring interface.Press this key again can shut down gauge.
ZERO
(zero key):The testing value on the screen can be zero when click this key.
SET
(switch mode key):When press this key,enter the ”Peak” mode.Press “SET“key for 4-5 seconds after starting up,and then loosen,can enter into the setting interface.
UNIT
(unit key)Press “UNIT“key for 4-5 seconds,the digital value inverted display.
Needle Type Fruit Hardness Tester | Needle Type Fruit Hardness Tester | Needle Type Fruit Hardness Tester | Digital Type Fruit Hardness Tester | Digital Type Fruit Hardness Tester | Digital Type Fruit Hardness Tester | |
---|---|---|---|---|---|---|
Display Type | Needle Type | Needle Type | Needle Type | Digital Display | Digital Display | Digital Display |
Range | 2-15kg/cm 2 (x10 5pa) | 0.5-4kg/cm2 (x10 5pa) | 0.5-12kg/cm 2; 1-24kg/cm 2 | 0.2~5.0 kgf/cm² | 0.5~15.0kgf/cm² | 7.9mm: 0.2~11.0kgf/cm²; 11.1mm: 0.4~22.0kgf/cm² |
Number of Head Dim | 1 | 1 | 2 | 1 | 1 | 2 |
Head Diameter | SR 3.5mm | SR 3.5mm | SR 8mm SR 11mm | 3.5mm | 3.5mm | 7.9mm / 11.1mm |
Resolution | ±0.1 | ±0.02 | ±0.1, ±0.2 | 0.01/0.1/1 | 0.01/0.1/1 | 0.01/0.1/1 |
Pressing Depth | 10mm | 10mm | 10mm | 10mm | 10mm | 10mm |