Feature
●【Impact device】This instrument is equipped with D-type sensor, which needs to measure the hardness of metal more than 5mm. D-type probe is a conventional probe, which is suitable for measuring most workpieces. Workpieces of special materials need to be equipped with other types of probes.Equipped with 7 types of impact devices which need not to be recalibrated when changing them, the system can identify the type of impact device automatically.
●【Scale】Converts to all common hardness scales(HV ,HB,HRC,HRB,HRA,HS)
●【Preset value】Upper and lower limit of hardness can be preset; When the tested value exceeds the limits, alarm will send out automatically to make convenient for the requirements of batch measurements
●【Back light】Back light display has been used to make convenient for the use in poor light
●【Data storage】Max 500 groups（impact times:32～1）of data can be stored at internal non volatile data storage
●【Easy to use】English displaying and menu operating, the operation is easy and convenient
●【Calibration】Please refer to the video on the product details page. First press the "Enter" key and then press the "On/OFF" key to display the average value and the nomimal (measuring for 5 times). Use the "Up and Down" key to adjust the true value to match the standard of the hardness block value, and then press the "Enter" key to start the hardness measurement.
Description
The Leeb Hardness Tester is equiped with D sensor,which needs to measure the hardness of metal more than 5mm. D-type probe is a conventional probe, which is suitable for measuring most workpieces. Workpieces of special materials need to be equipped with other types of probes.
- Calibration------Please refer to the video on the product details page. First press the "Enter" key and then press the "On/OFF" key to display the average value and the nomimal (measuring for 5 times). Use the "Up and Down" key to adjust the true value to match the standard of the hardness block value, and then press the "Enter" key to start the hardness measurement.
- PC software-------Not include PC software in package,due to transportation restrictions,If you need software, please send me a message
Specifications:
- Measuring range：(170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA,(13-100)HRB
- Measuring direction：360°
- LCD display of 128×64 matrix is used.
- 7uints (HL,HV ,HB,HRC,HRB,HRA,HS)
- English displaying and menu operating, the operation is easy and convenient
- With USB interface, multiple communication modes are adopted to meet customized requirements of various users.(Not include PC software)
- Equipped with 7 types of impact devices which need not to be recalibrated when changing them, the system can identify the type of impact device automatically
- Max 500 groups（impact times:32～1）of data can be stored at internal non volatile data storage
- Upper and lower limit of hardness can be preset; When the tested value exceeds the limits, alarm will send out automatically to make convenient for the requirements of batch measurements
- Back light display has been used to make convenient for the use in poor light.
- Test values software calibration function.
- Material of “cast steel” is added; HB values can be read out directly,when D/DC impact device is used to measure “cast steel” work piece.
- Printer be separated from main unit and copies of testing results can be printed as required.(Printer is not included)
- Power is two of AA battery. Continuous working period: approx. 200 h(no back light on).(Batteries is not included)
- Software of PC can be installed according to the requirements of user,the function will be more powerful to satisfy the more strict demands of quality control and management.(Software of PC is not included)
Standard Configuration
1.Main unit----1
2.D type impact device---1 With cable
3.Standard test block---1
4.Cleaning brush (I)---1
5.Small support ring---1
6.English Manual---1
7.package case---1
Testing Range
