Feature(may vary by option.)
●Thermostatic mixing valve: output water with constant temperaure to avoid scald. This is especiall helpful for elderly and children.
●Cold and hot water mixer: two inlets mared with C and H for cold and hot water, ,mixing water outlet marked with mixer, (do not connect the cold and hot water inlet on reverse). You can adjust water temperature by the knob, safety temperature is 38 degree
●Easy installation: All G1/2 male connection for inlet and outlet. just connect the hot and cold water pipe, then automatically transfer out the constant temperature water.
●Smooth water flow: With bulid-in check valve to ensure theres no water flowing backward. And inside is a one-way valvewhich can prevent cold and hot water from interacting with each other.
●Packing with foam and color box, with teflon tape. Any questions, you can leave us message. Our service team will reply you within 24 hous and solve the problem until your satisfaction..
●Usage: Thermostatic valve is widely used in bathroom shower,solar system.Bathroom and kitchen faucet for water temerature control.
[thermostatic valve A]
[thermostatic valve B]
[water mixer valve]
Description
Gangang Thermostatic Mixing Valve
Features:
1. Easy to install, just connect the hot and cold water pipe, then automatically transfer out the constant temperature water.
2. The temperature can be adjusted, especially for the elderly and children.
3. When the single pipe of cold water or hot water is cut off, it can automatically stop water instantaneously to prevent scald and cold.
4. When the pressure and temperature of water distribution of cold and hot water change, the water that can automatically adjust and compensate instantaneously will always flow out of the set temperature.
5. Inside is a one-way valve, which can prevent cold and hot water from interacting with each other.
Thermostatic Mixing Valve Parameters
- Port size: DN15, G1/2”
- Theoretical pressure: 0.1-0.5 MPa If the pressure is over 0.5 MPa, please install a relief pipe.
- Cold water:5-29 °C
- Hot water:50-95 °C
- Adjustable temperature range: 20 - 50 ° C.
- The most comfortable temperature: 38 ° C below 0.3 MPa, cold water temperature within 18-23 ° C; Hot water temperature within 60-80 ° C.
- Safety test: If the cold water supply is interrupted within 5 seconds, the drains are automatically reduced to 1.9 l / min, the drains less than or equal to 150 ml, the drain temperature less than or equal to 49 ° C.
- Sensitivity test: when the inlet water temperature is constant and the pressure can be changed by about 20%, the drain temperature changes less than or equal to 2 ° C; If the inlet water pressure is constant and the hot water temperature changes to 50-80 ° C, the cold water changes to 5-29 ° C, then the outlet temperature changes less than or equal to 2 ° C.
Gangang Thermostatic Mixing Valve
|
|
|
|
|
|---|---|---|---|
Brass ValveMade of high grade brass with chrome plating,anti-rust,pressure and explosion resistance,with stable performance,safe and secure. |
Thermostatic LockingAfter setting the water temperature,the cartridge will adjust the water flow of cold and hot water,balance water pressure. It can prevent the pulsation of heat and cold. |
Filter Screen DeviceThe filter screen can filter particulate impurities so that the valve has a longer service life and can be easily cleaned. |
Check ValveBoth the cold and hot water inlets are with check valve. It can prevent cold and hot water from channeling and prevent the secondary backflow of water in the valev from polluting the water source. |
Thermostatic Mixing Valve
|
|
|
|
|---|---|---|
|
|
|
|
