Feature

●Size: Inner Diameter: 44mm / 1.75"; Outer Diameter: 48mm / 1.89"; Unwelded Length: 242mm / 10"; Overall Length: 348mm / 14"
●Function: Isolate noise, relieve vibration, and reduce the stress on the pipes.
●Installation: Directly weld on with no modification required.
●Durability: Made of rust-resistant materials, durable for a long time to use.
●Package Included: 1 x Car Exhaust Flex Pipe


Description

Standard Image Header With TextStandard Image Header With Text

1 Pcs 1.75"x10"x14" Car Exhaust Flexible Pipe Tubing Universal Exhaust Joint with Welding Extension Pipe Stainless Steel Silver Tone

Description:

  • These flexible exhaust pipes are intended for weld-in installation in an exhaust system to isolate noise, relieve vibration, and reduce the stress on the pipes a stainless steel internal bellows for vibration isolation, and an internal stainless steel braid to reduce noise and whistling.
  • Made of Stainless Steel, durable, and corrosion-resistant.
  • Universal for most cars to use.
  • No instruction included.

Specification:

  • Material: Stainless Steel
  • Color: Silver Tone
  • Inner Diameter: 44mm / 1.75"
  • Outer Diameter: 48mm / 1.89"
  • Unwelded Length: 242mm / 10"
  • Overall Length: 348mm / 14"

How to Install:

  • First, remove the old exhaust flex pipe.
  • Then place the free end of the new exhaust flex pipe on it and adjust the position of the muffler and downpipe until it is straight but without tension.
  • Pass the bolt through the hole at the end of the exhaust flex pipe connected to the muffler flange. Tighten them to secure the pipe to the flange.
  • Place a new clamp where the exhaust flex pipe meets the downpipe and tighten it. Retighten the bolts that secure the muffler and downpipe.

Note:

  • Please allow a 1-2mm error due to manual measurement.
  • Please wear gloves when installing to avoid scratches.
  • Professional Installation is highly recommended!

Package Included:

  • 1 x Car Exhaust Flex Pipe

Product information