●The Strongest Brackets to Build A Swing Set - Made of heavy gauge steel, 100% welded joints,heavy and durable. Also painted nicely to stay rust free for a good looking swing set for years to come. ●What You Get - 2 swing set brackets, 28pcs wood screws and 28pcs washers. BETOOLL frame brackets set includes screws and washers required to install them. ●Making A Seriously Sturdy A-frame in the Easiest Way - We recommend using one kiln-dried 4x6-114" top beam (with a true measurement of 3-1/2" x 5-1/2") and four kiln-dried 4x4-96" (with true measurements of 3-1/2" x 3-1/2") side support legs to construct a basic A-Frame which completed dimensions:12Lx8Dx78"H.(Lumber is not included in this kit.) ●Easy Install - First attach the swing set brackets to 4x6 top beam. Then simply slide the 4x4 legs into the brackets with the beam lying on the ground (top down). Pre-drill the holes for the lag screws and ratchet them down. Also you could add a 2x4 cross piece on the legs for added stability. ●Kindly NOTE - The bracket openings measure 3-5/8" x 5-5/8" and 3-5/8" x 3-5/8". Make sure the length of 4x6 top beam is shorter than 114", the top beam may gonna to bend if it is longer than 114".
[End Brackets(Black)]
[Middle Bracket(Green)]
[End Brackets(Green)]
Description
Swing Set Brackets Instruction Manual
step 1
Install all the swing hangers first.
step 2
Slide bracket over end of beam until its flush with wood.
step 3
Use 1/4" pilot drill bit to drill holes.
step 4
Use lag bolts and washers fasten brackets.
step 5
Slide side supports into bracket.
step 6
Repeat steps 3-4,secure side supports with lag bolts and washers.
BETOOLL have swing set brackets, swing middle bracket, swing hangers and glider swing brackets in sold, enjoy your shopping time.