[G1 & 2 Male Thread]
[G3 & 4 Male Thread]
Main application:
Magnetic Water Flow Switch adopts a Magnetic Reed Switch and a movable magnet which is fixed inside the water pipe. When water runs through the pipe part, the magnet will detect the water flow, and the magnet is shoved to one side by the flow. This then attracts the conductive strip which gets pulled down and makes contact, which completes the circuit and activates whatever electrical device you have attached to it
Specifications:
Thread type: 3/4" BSP Male Thread
It is fit in NPT Thread if you connect them with teflon
Operation voltage: 0-220V(AC or DC)
Flow range: 1-30L/min
Working temperature: 1-120℃
Mini start water pressure: 0.02Mpa
Max working pressure: 1.75 MPa
Max loading power: 50W
Working current: 0-2A
Response time: 0.2S
Material: Brass
Male Thread External Diameter: 25.85mm(1.0 inch)
Tube Length: 60mm(2.36 inch)
Cable Length: 29cm(11.41 inch)
Size: 60mm*30mm*30mm(L*W*H)
Please Note:
Dont forget to mark which way the old flow switch arrow is pointing so you can install exactly the same.
Package Include:
Brass Flow Switch x 1