[8000T]

Savant Digital Water Meter 3/8" NPT with LCD Display - 8000T

The DigiFlow 8000T can monitor a single filter - flow volume or time elapsed. Users can program the flow volume and time by themselves. The DigiFlow 8000T will count down from the programmed flow volume or time value, and generate an audible alert when it reaches the end.

⚡Electrical⚡:
Operating Voltage: 3 DC Volts
Operating Current: 1.0 mA (work), 0.015 mA (sleep)

💧Flow Rate💧:
3.72 gpm, 14.1 lpm
Min. 0.40 gpm, 1.5 lpm

⚙️General⚙️ :
Temperature : 0~40℃ (32~104 ℉)
Pressure : Max. 6.0 bar (85 psi)
Weight : 140 g (5.38 oz)
Accuracy : +/- 10%
Connection : 3/8 inch NPT Female

📦️Content 📦️:
1. User Manual
2. AAA alkaline batteries x2
3. Quick fitting 1/4"OD-3/8"NPT@2PCS
4. Quick fitting 3/8"OD-3/8"NPT@2PCS

✨Features✨:
Digital meter with ability to reset totalizing so users may track total flow in gallons. It offers ability to monitor five independent functions, with capacity settings from 100 to 9,900 gallons. (Stages that are not used can be disabled.) Audible alarm indicates cartridge replacement.

📢Instruction of selecting Gallon mode:

1️⃣Take out batteries.
2️⃣Put it back.
3️⃣Keep pressing the “RESET” button when re-install batteries.
4️⃣Release pressing when hearing a short “beep” sound.
5️⃣The mode is changed to Gallon mode.
6️⃣The change will be only memorized when the LCD turns off.

⚠The minimum water flow rate is 0.55 gallon/min.⚠ It must be installed before the Faucet and the outlet of the water purifier.

⚠If you are using an RO system, it should be installed after the pressure tank.⚠