Feature

●The 8-way power cord included in the package is designed for guitarists who connect multiple pedals at the same time. Only one adapter or power socket is required.
●Pulsation: <30MV This is a professional noise isolation capability, you can ensure that you get a quiet state when using the pedal.
●Output voltage: DC 9V Output current: 1A (1000MA) Input voltage: AC100-240V 50 / 60HZ
●The adapter shell uses fireproof materials, but this is only a kind of protection, please pay attention to fireproofing.
●Suitable for most 9V pointed negative guitar effect pedals.If you hear noise when connecting to the power supply, please make sure that your cable connection is correct

Description


9 volt adapter is suitable for any desired negative tip 9V pedal, to minimize or eliminate the need to replace the battery carrying.Use a fireproof material shell, this is just a protection, please be careful of fire.	You can simultaneously run eight pedal the pedal board. You do not have a noise problem, you can easily use a different effect groups.	Smooth, happy shredding!

Ripple diagram description

The influence of the current signal on the simulation effect: the audio image of the current signal is obtained by the ripple tester. The value is expressed in MV (millivolt). The ripple value of most adapters is 450 MV, and the image fluctuates greatly. When electrical signals are amplified hundreds of times by sound, noise will be generated. Therefore, the smaller the ripple (MV) value, the smaller the noise. What we make is a professional guitar pedal adapter, so its ripple is below 30MV. Let you not worry about noise.


The magnetic ring can reduce noise and dust. Professional noise isolation performance make sure you have a quiet pedal chain status while playing. Absolutely no sound / signal loss.	The newly upgraded noise reduction circuit board of 2021 adopts dual noise filter element design to ensure a quiet environment when you are playing music.	1 x pigtone 9V Power Adapter 1 x 8 way Daisy Chain