Feature(may vary by option.)

●360° FLEXIBLE HEAD-build in a 360 degree rotatable ball joint design, the wave maker can be easily adjust any direction of water current to satisfy different angle needs, has helped keep tank clean by reducing dead corners.
●CIRCULATION, OXYGENATION & FILTRATION-①agitate water: Place the wave pump near the water surface to create surge current in which adding oxygen to the water make your fish thrive.②circulation: its not only provide a natural current for corals and give fish additional exercise, but also circulate water for evenly heating. ③ efficient filtration: adjust the powerhead down, its water flow blow up debris pile up at the gravel, and eventually be sucked into filter.
●EASY TO DISASSEMBLE AND CLEAN-Certified by ETL of a high standard that the powerhead coupled with an efficient motor and corrosion resistant ceramic shaft，it is long lasting and saltwater aquarium available. And the protect guard is removeable for easier cleaning.
●MAGNETIC BASE EASY INSTALLATION- The magnet allows you to easily mount on the 4~10mm thick glass and freely move to find the optimal place for your tank. It also comes with cotton pad that is meant to absorb vibration helps in maintaining less noisy operation.
●PARAMETER- Compact size 2.6 x 2.16x 4.7inch, can be concealed from view. Max flow rate 530GPH suitable for 5~20 gallons fresh and salt water aquariums. Wattage 3W, Voltage AC 110~120V, Power cord length 5.9FT.

[530GPH for 5~20 Gallon Aquariums]




[1056GPH for 20~100 Gallon Aquariums]





Description

wave makerwave maker

Easy to Disassemble and Clean

wave makerwave maker

Magnet Attachment Mount, Stable and Flexible

powerheadpowerhead

wave pumpwave pump

maker wavemaker wave

aquarium powerheadaquarium powerhead

  • Step 1 Rotating a side magnet attachment. Then install the powerhead into the ball joint.

  • Step 2 Put the powerhead into the tank and closely tank wall.
  • The magnet is decent enough to stay securely on 4~10mm thick tank.

  • Step 3 Slide the magnetic holder slowly to fit together.
  • Do not directly overlap the inside and outside to prevent the glass from breaking.

  • Easy to move this unit around during operation without putting your hand into the aquarium water.
  • Attention: be careful your fingers when installing.

Place Wave Pump in Different Locations to Meet Different Needs

power headpower head

water pumpwater pump

power headpower head

Agitate Water

Place the wave pump near the water surface to create a surge current in which adding oxygen to the water makes your fish thrive.

Circulation

It not only provides a natural current for corals and gives fish additional exercise but also circulates water for evenly heating.

Efficient Filtration

Adjust the powerhead down, and its water flow blows up debris pile up in the gravel and eventually be sucked into the filter.

powerheadpowerhead

Product information