[Replacement Hepa Filter]
[Green]
Turn any storage tote or box into a portable laminar flow hood in minutes.
|
|
|
---|---|---|
Use any tote or box to create your hoodChoose a plastic storage tote to be used as a hood. Typically, a 20-liter tote will work just fine depending on your needs. |
Use the provided templateUsing the given template, place it on the top of your tote and trace the inside of the template using a permanent marker, then use a razor or hot knife to cut out the hole. |
Cut a hole and place the unitPlace the fan/filter housing into the hole. Optional, if you glue the template to the underside when the housing is inserted you will have a much cleaner fit. |
Fan/filter housing | 3d printed from recycled plastic |
Premium fans | Dual ball bearing - 5000 rpm fans |
Filter | H13 HEPA filter with carbon scrubber. Filter is rated at .2 micron. |
Variable speed | Variable speed controller to vary the wind speed inside the box based on your needs. |
Template | The provided template is the support from the unit which would normally be waste. Gluing the template to the underneath is also an option. |