[39ft & min]
[52.49ft & min]
Specification
Material: Sheet Metal, Stainless Steel
Dispensing Capacity: 3000ml/126.8Oz
Input Voltage: AC110-220V
Rated Frequency: 50HZ/60HZ
Rated Power: 150W
Plug Type: US Standard
Heat Seal Temperature: 105-115℃/221°F-239°F
Air Volume: 001-100 Adjustable
Filling Speed: Max 16 meters/min / 52.49ft/min(001-100 Steps Adjustable)
Filling Accuracy: 99%
Filling Type: Volumetric Filling Machine
Electrocution Category: Class I
Power Connection: Yes
Assembly Required: Yes
Machine Main Body Width: 15cm/6in
Notes
1. It is recommended that you stop the machine after 2 hours of continuous use. Please clean and maintain the product regularly to ensure its proper operation, and do not use it in a humid environment.
2. Before the operation, please note the following: If the system is not properly grounded, it may cause an electric shock. The material is driven by the machine will produce static electricity, the material itself has static electricity, the operation of the workers can not wear shoes or barefoot, otherwise, the human body will become a conductor of static electricity discharged, so there will be a sense of discomfort from the electric shock.
3. While using, if the sealing edge is not solid, the sealing broken, etc., please check whether the temperature is correct. If the high-temperature belt and high-temperature tape are broken, please replace them in time.
4. Inflatable speed and air volume need to be adjusted, different varieties of performance parameters are not the same. Please adjust the record by yourself as it does not have a fixed standard value.
5. This product does not include inflatable film, but the machine is suitable for most of the films on the market, please pay attention to the size when you buy the film.