Feature

●✔𝟯- 𝗜𝗡-𝟭 𝗣𝗛/𝗧𝗗𝗦/𝗧𝗘𝗠𝗣𝗘𝗥𝗔𝗧𝗨𝗥𝗘 - pH meter has 3-in-1 function, which can measure pH, TDS and temperature with high precision at the same time. With just a water tester, you can easily monitor multiple important parameters in your water.
●✔𝗛𝗜𝗚𝗛 𝗔𝗖𝗖𝗨𝗥𝗔𝗖𝗬 - Drinking water pH tester with the high-sensitivity probe, you can quickly read the results, measurement range of 0-14.0. With a high accuracy of 0.01 resolution. pH meter provides precise pH readings, ensuring that you get accurate information about the pH level in your water.
●✔𝗔𝗨𝗧𝗢𝗠𝗔𝗧𝗜𝗖 𝗖𝗔𝗟𝗜𝗕𝗥𝗔𝗧𝗜𝗢𝗡 - Digital pH meter has the function of automatic calibration, and is equipped with calibration powder of pH 4.00/pH 6.86/pH 9.18, just press the automatic calibration button, water pH meter will automatically identify the calibration solution. Automatic calibration can ensure accurate and consistent readings every time.
●✔𝗦𝗠𝗔𝗥𝗧 𝗔𝗧𝗖- pH meter has an automatic temperature compensation function, which can be adjusted according to the water temperature and water quality. Water meter can accurately determine the pH value of the sample in the temperature range of 32°F-140°F(0°C-60°C), so as to solve the inaccurate problem caused by changing the liquid temperature.
●✔𝗪𝗜𝗗𝗘 𝗔𝗣𝗣𝗟𝗜𝗖𝗔𝗧𝗜𝗢𝗡 - Lightweight and portable size allows you to take TDS meter around easily in your pocket and do your measuring anywhere. Digital TDS pH meter for water can be used to test drinking water, swimming pools, pH balance in aquarium and any other liquids. pH meter with green backlit LCD helps to easily record readings, even in low light conditions.


Description

3-IN-1 PH METER : Water quality tester has a 3-1 function, which can measure pH, TDS and temperature with Fe high precision. All-round measurement of water quality to ensure healthy water quality.

𝗪𝗜𝗗𝗘 𝗔𝗣𝗣𝗟𝗜𝗖𝗔𝗧𝗜𝗢𝗡

pH/TDS/Temperature plays a pivotal role in making the nutrients in your solution soluble so that they can be accessed by your plants. To help your plants thrive, pH meter gets the fundamentals right by measuring pH/TDS/temperature to ensure that these are always within the optimal range. Easily observe the living environment of aquatic organisms.

𝗖𝗮𝗹𝗶𝗯𝗿𝗮𝘁𝗶𝗼𝗻 𝗽𝗛 𝗦𝘁𝗲𝗽𝘀

1. Before calibration, add the pH4.00/pH6.86/pH9.18 buffer powder into beaker with 250ml (under the temperature of 25℃) of distilled water, then stir until the powder has completely dissolved.

2. Press the ON/OFF button to turn on.

3. Press the TEMP / CAL button, adjust to pH mode.

4. Place the electrode in the pH 4.00/ 6.86/ 9.18 standard solution.

5. Wait for the readings to stabilize(usually 5~10 Seconds).

6. Press and hold the TEMP/CAL button for 6 seconds, then you can see corresponding value flashing 3 times which means calibration of pH is completed.

𝗡𝗼𝘁𝗲:

Do not turn on the switch of the pH meter in the air, which will interfere with the calibration of the pH meter. When the ph attribute value of the pH meter calibration solution appears, the number will always display an error of 0. In this case, the solution is: use our attached pH buffer powder to recalibrate the pH pen. After the calibration is completed, be sure to remember not to turn on the switch of the pH tester again in the air.

When measuring the same amount of solution, the pH value of the solution will produce errors with time and place changes. This change is normal, and it is not a wrong reading of the water test meter.