Feature

●IDC pin pitch 2.54mm/0.1" male header connector. Standard IDC50 pitch 0.1" header, you can use 50pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.
●C45 DIN Rail Mounting: Solid din rail mount breakout board, compatible with 35mm, 32mm or 15mm DIN rail.
●Wire range: 26-16AWG. Rated voltage: 60V. Rated current: 1A / per pin. Operating temperature: -20 to 50 Celsius.
●The screw terminal connectors make attaching and removing wires easily. Really helpful in your DIY prototyping project.
●Widely Applications: It is well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2x25 50-position header connector. Applications include the Raspberry Pi A+, B+, 2B, and 3B boards, all of which use a 0.1" pitch 2x25 I/O pin header for their GPIO expansion ports.

Description

5.08mm Screw Terminal Block

Terminal block: Pitch 5.08mm; Wire range: 26-16AWG.

Clear Labeled

Signal line all the leads, number clearly marked

C45 DIN Rail Mounting

Solid din rail mount breakout board, compatible with 35mm, 32mm or 15mm DIN rail.

Widely Applications

It is well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2x10 20-position header connector. Applications include the Raspberry Pi A+, B+, 2B, and 3B boards, all of which use a 0.1" pitch 2x10 I/O pin header for their GPIO expansion ports.

5.08mm Screw Terminal Block

Easy to Identity

Wiring Reference

DIN Rail Mount DB25 Interface Module

Easy to Use

5.08mm Screw Terminal Block

Clear Labeled

C45 DIN Rail Mounting

Widely Applications

Easy to Use

Wiring diagram