Feature(may vary by option.)
●IMPORTANT: NOT OEM LENGTH. This is an extended length lug bolt, NOT an OEM replacement lug bolt. NOT to be used without wheel spacers. The correct length will depend on your OEM bolts length and the spacers thickness. See Diagram for Measuring Help. MEASURE BEFORE PURCHASING. Installing bolts that are too short can cause them to fall out while driving. Installing bolts that are too long may damage brake components.
●WARNING: VERIFY VEHICLE LUG BOLT SIZE, SEAT AND THREADS. Check your vehicles bolt thread size, as various years/models come with different size bolts. These are Cone Seat (60 Degree Taper) shaped bolts. Make sure your wheels bolt seat have this seat type. See Diagram for Help. During Installation, ensure that your bolts get 5-8 full turns before tightening.
●[SPECIFICATIONS] Pack of 10 - Silver Bolts | Thread Size: 14x1.5 | Seat Type: Cone Seat (60 Degree Taper) | Shank Length: 45mm (ie thread length).
●MANUFACTURING: Made with cold forged steel. Machine precision threads ensure the best fit on your vehicles hub. Zinc coating provides exceptional corrosion/rust resistance and appearance. Additional Heat Treating Process ensures dependable strength, durability, and performance.
●FITMENT: Compatible with Audi A3, S3, A4, S4, A5, S5, A6, S6, Including FWD RWD Quattro. Compatible with Audi A7, S7, A8, S8, TT, Q5, Q7, Including FWD RWD Quattro. Also compatible with Volkswagen 1985+ Beetle, 2007-2016 EOS, 1993-1998 Golf V6, 1999+ Golf. Compatible with Volkswagen 2006+ GTI, 2000+ Jetta, 1998+ Passat, 2009+ Tiguan.
[45mm Thread Length Silver]
Description
10pcs Extended Silver Lug Bolts 14x1.5 (45mm Shank Length - Not OEM Length, Cone Seat)
A Must Have When Adding Wheel Spacers
When installing any kind of slip-on wheel spacer, it is very important to change your lug bolts. This is necessary because the added thickness of the spacers reduces the thread engagement of the stock lug bolts. The solution to this is extended length lug bolts. With the added thread length, the bolts are able to engage your hub with enough turns for safer operation. StanceMagic has you covered with a wide range of extended lug bolts! Please see the section below for how to determine what shank / thread length bolt is needed for your specific application.
Be aware that installing bolts that are too short can cause them to fall off while driving. Alternatively, installing bolts that are too long may damage brake components. Please see specification list for more info.
- Thread Size: 14x1.5
- Color: Silver
- Seat Type: Cone seat (60 Degree Taper)
- Shank/Thread Length: 45 mm.
- Material: 10.9 Metric Grade Cold Forged Steel
- Kit content: 10 pcs per pack
|
|
|
|
|---|---|---|
|
Zinc coating provides ultimate corrosion, rust, & scratch resistance, enduring any weather condition. |
Threads are machined precisely to ensure the best fit onto your vehicles hub every time. |
Manufactured with metric grade 10.9 cold forged steel to ensure dependable strength, durability, and performance. |
IMPORTANT: CHECK BEFORE PURCHASING
- These are extended-length bolts and are meant to be used with wheel spacers.
- Vehicle must use 14x1.5 threaded lug bolts.
- Shank Length: Verify this 45 mm Shank Length Bolt is the correct size. Buyers must measure their OEM bolt and spacer thickness to determine if this is the correct length. Please see above "How to Determine Shank Length Needed" diagram for measuring help.
- Measure before purchasing: Installing bolts that are too short can cause them to fall out while driving. Installing bolts that are too long may damage brake components.
- Verify vehicle lug bolt size, seat, and threads: Check your vehicles bolt thread size, as various years/models come with different size bolts. Installing incompatible hardware can cause damage to vehicle components and may cause lug bolts to loosen while driving.
- Seat Type: Check your wheel lug hole. These bolts will only work if your lug holes are Cone Seat (60 Degree Taper).
- What is the difference between Cone and Ball seat?This is determined by your wheels lug seat. The seat of the bolt refers to the part of the bolt that makes contact with the wheels lug seat. The most common seats are Cone (conical / tapered) and Ball (radius / rounded). Cone type features a straight taper seat, whereas Ball type features a curved seat.
- How do I determine what Shank Length I need?
- 1) Measure shank length of OEM bolt (Threaded portion, starting at end of the seat to the end of the bolt).
- 2) Measure the thickness of the spacer you will be using.
- 3) Add measurements from step 1 and step 2, and you have the shank length you need.
- During Installation, ensure that your bolts get 5-8 full turns before the lug nuts/bolts begins to tighten.
- If you have questions about product or fitment, please use the "Customer Questions & Answers" feature in this listing below this section, we will be happy to help you. For fitment help, include the year/make/model of your vehicle.