Feature

●✅280kg holding force electric magnetic lock offers reliable performance.
●✅Can be used as a stand alone keypad. Doesnt need to connect on the computer, can works alone.
●✅The access control keypad is made of high quanlity ABS plastic and the panel is made of hard shell rubber film.
●✅Lock output current short circuit protection.
●✅This system is widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.


Description

A01 access keypadA01 access keypad

Features of Access Keypad:

  • Full programming from the keypad
  • High quality and high security
  • Sensitively and response quickly
  • Classical appearance with useful function
  • Designed for home and office
  • Supports Card, PIN, Card + PIN, Card or PIN
  • Adjustable door open time (0-99 seconds)
  • Very low power consumption
  • Lock output current short circuit protection
  • Built-in buzzer; No keypad backlight
  • Red, blue, white, yelolw and green LED indicators display the working status
  • It is widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.

Specifications of Access Control Keypad:

  • Operating Voltage: 12VDC
  • Lock Output Load: Max. 1.5A
  • Idle Current: 50mA
  • RFID Card Capacity: 500
  • PIN Capactity: 500
  • PIN Digits: 4-8 digits
  • Card Type: Standard 125KHz EM
  • Door Relay Time: 0-99 seconds
  • Compatible Cards: EM compatible card (Cant support some encrypted cards,such as HID, Indala, Cobra, APCiK ,Paradox, Radio, Honeywell, etc.)
  • External Reader: Not support
  • Waterproof: Not support
  • Keypad Backlight: Not support
  • Shell Material: Plastic
  • Product Weight: 100g / 3.5oz
  • Card Reading Distance: Max. 6cm (2-23/64")
  • Shell Size: 100x100x18.5mm (3-15/16" x 3-15/16" x 47/64")
  • Door Open Options (admin user selectable): Card Only / Password Only / Card + Password / Card or Password
  • Working Temperature: -30°C-60°C / -22°F-140°F
  • Working Humidity: 10%-90%RH, non-condensing
  • Wiring Connections: Electric Lock, Exit Button, External Bell

Specifications of Electromagnetic Lock:

  • Input Voltage: 12VDC, 520mA
  • Collinear Load Test 280kg / 600pounds
  • NC mode - (locked while supplied with power), fail safe
  • Output Contact: NO/NC/COM

locklock

Electric Magnetic Lock:

  • MOV Provides Reverse Current Protection
  • Anti-Residual Magnetism Designed
  • High Strength Material,Anodized Aluminum Housing
  • Design without Mechanical Failure
  • Increase the holding force, dual Isolative Housing
  • Size (LxWxH): 250x48.8x27.9(mm) / 9 -27/32" x 1-59/64" x 1-3/32"
  • Armature Plate Dimension (LxWxH): 180x38.8x13(mm) / 7-3/32" x 1-17/32" x 33/64"
  • Cover Finish: Anodized aluminum
  • Lock Finish: Zinc
  • Armature Plate Finish: Zinc

11

Remote Control:

  • This kit come with a remote which can open door remote
  • Fixed code, and it can be easily programmed
  • Number of Buttons: 2
  • Operating Type: Momentary / Toggle / Latched
  • Default setting is Momentary
  • Remote Operating Frequency : 433MHz
  • Enslosure Material: ABS Plastic
  • Transmitter Working Voltage: 6VDC (Built-in 2pcs CR2016/3V button battery)
  • Service Life of the Battery: 50000 cycles tested
  • Dimension (LxWxH): approx. 58x33x12mm / 2-9/32" x 1-19/64" x 15/32"

Humanization Design of Access Keypad:

11

11

A01 access keypadA01 access keypad

High-performance 32-bit MCU:

  • It uses high performance 32-bit MCU mainstream microcontroller which could offer a high level of integration to ensure the stable performance. In addition, the MCU microcontroller also combines the optimized dynamic consumption with a comprehensive set of power-saving modes to make the power consumption lower.

High Performance:

  • The switch mode power supply (SMPS) solution which adopts the synchronous step-down DC-DC converter can greatly reduce the heat generated by the circuit board.
  • Power relay provides excellent switching performance for electric locks.

Multi-colored Light Indicator:

  • Red shows the device is in the standby mode.
  • Green shows the operation is successful
  • Blue shows the device is in the programmimng mode.
  • LED indicator flashes red 3 times to show that the operation is failed.

remote wiringremote wiring

HBK-P01 power supplyHBK-P01 power supply

HBK-A01 SystemHBK-A01 System

Wiring of Remote Control:

  • Remote box wired with power supply
  • Clear Code: Press and hold the learning key for 8 seconds, until the LED light turn off, indicating the clear code is successful.
  • Pairing Transmitter and Receiver: Press the learning key once, LED light flashes one time, then press the button on the transmitter, the light will flashes 3 times, indicating paring is successful.

Power Supply:

  • Input Voltage: AC110-240V (Worldwide voltage)
  • Input Frequency: 50-60Hz
  • Output Voltage: 12VDC/3A
  • Enclosure Material: Aluminum alloy
  • With Backup Battery Link, support add external battery.
  • Output Stability: 0.5% Typical
  • Time Delay: 0-15s
  • Dimensions (LxWxH): 4-29/64" x 3-5/64" x 1-17/64" [113x78x32mm]

Package:

  • 1 x Access Keypad
  • 1 x Electric Magnetic Lock
  • 1 x Power Supply
  • 1 x Exit Button
  • 1 x Remote Control
  • 5 x RFID Keyfobs
  • 5 x ID Cards (3.375" x 2.125", 30 mil thick)
  • 1 x English User Manual
  • Tips: Please search B07TH336QB to get more remote transmitters.

Wiring Diagram

HBK-P01 power supply newHBK-P01 power supply new

Type of Electronic Lock:

  • Fail-secure lock (locked when power removed), such as electronic controlling lock, smart lock, etc.
  • Fail-safe lock (unlocked when power removed), such as eletromagnetic lock, electronic bolt lock, etc.

Principle of Electronic Lock:

  • The relay will close contact to unlock the lock and will release after unlocking
  • COM: Common, relay contact
  • NC: Normal close, normally keep closed to COM
  • NO: Normal open, normally keep opened to COM

Product guides and documents

User Manual (PDF)