Feature(may vary by option.)

●BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer
●PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
●VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filters frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
●HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
●LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
●VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
●DIMENSIONS: 14 inches in Depth, 12. 3 inches in Width and 3. 3 inches in Height. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
●: BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

[8 inch Speaker S]




[10 inch Speaker S]





Description

imageimage
imageimage

imageimage
Subwoofers

Amplified Car Subwoofer - 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control

BAB10

Break Your Subwoofer In. Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

  • • One 10" Woofer with SINGLE 2.6 ohm Voice Coil
  • • 1200 Watts MAX 600 Watts RMS Power Handling
  • • RCA & Speaker Level Inputs, High Level Inputs
  • • Thermal, Short and Overload Protection Circuits, Power & Protection LEDs
  • • Phase Control, Subsonic Filter, Low Pass Crossover, Variable Bass Boost, Input Gain Control

Features

testtest

imageimage

imageimage

imageimage

Built-in Amplifier

Systems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder.

Remote Sub Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

High Level Inputs

High-level inputs accept speaker output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

imageimage

imageimage

Low Level Inputs

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

Variable Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.