Feature
●1. ABOUT ARB730LB TREE TRUNK PROTECTOR: When using a tree as an anchor point in a recovery situation, wrapping cable, rope or chain around it causes damage to both your equipment and the tree. This means next time you may not have a viable anchor point for recovery. Keep your anchor point unharmed and able to be used again by either you or a fellow off-roader with ARB’s tree trunk protectors.
●2. WHY HAVING A TREE TRUNK PROTECTOR: Designed primarily to protect a tree from ringbarking, the tree trunk protector can be used to connect a winch rope to almost any anchor point, ensure that it is capable of withstanding the load.
●3. IMPORTANT TO CONSIDER BEFORE USING ARB730LB: Make sure the tree is well rooted and try not to place shock loads upon it, as it may be possible to uproot the tree, in turn causing damage to the vehicle or serious injury.
●4. ABOUT ITS COMPOSITION / FEATURES: ARB tree trunk protectors are manufactured from 100% polyester webbing. It has reinforced eyes and counts with eye and seam protector sleeves. Tree straps are designed to hold firm; no stretching. Breaking strength: 26,000 lbs / 12,000 kg Length: 10 ft Width: 3" / Designed to hold firm / Material: 100% polyester Reinforced eyes: yes Eye & seam protector sleeves: yes.
●5. PROTECTION AT ALL COST: Dont trust your vehicle to substandard recovery gear that could jeopardize your safety and your vehicle. Likewise, make sure youre using the appropriate equipment for your situation. Fabricated to ARB specifications, tested by a NATA-approved laboratory. ARB tree protector straps are manufactured from 100% polyester webbing and feature reinforced eyes for additional durability.
Description
Breaking strength 26,000 lbs in Green
ARB730LB TREE TRUNK PROTECTOR 10 FT
- Breaking strength: 26,000 lbs / 12,000 kg
- Length: 10 feet / Width: 3" / Material: 100% polyester
ARB730LB TREE TRUNK PROTECTOR 10 FT
When using a tree as an anchor point in a recovery situation, wrapping cable, rope or chain around it causes damage to both your equipment and the tree. This means next time you may not have a viable anchor point for recovery. Keep your anchor point unharmed and able to be used again by either you or a fellow off-roader with ARB’s tree trunk protectors.
-
¿WHY HAVING A TREE TRUNK PROTECTOR?
Designed primarily to protect a tree from ringbarking, the tree trunk protector can be used to connect a winch rope to almost any anchor point, ensure that it is capable of withstanding the load.
-
IMPORTANT TO CONSIDER BEFORE USING ARB730LB
Make sure the tree is well rooted and try not to place shock loads upon it, as it may be possible to uproot the tree, in turn causing damage to the vehicle or serious injury.
-
ABOUT ITS COMPOSITION
ARB tree trunk protectors are manufactured from 100% polyester webbing. It has reinforced eyes and counts with eye and seam protector sleeves. Tree straps are designed to hold firm; no stretching
-
FEATURES
Breaking strength: 26,000 lbs / 12,000 kg Length: 10 ft Width: 3" / Designed to hold firm / Material: 100% polyester Reinforced eyes: yes Eye & seam protector sleeves: yes.
-
PROTECTION AT ALL COST
Dont trust your vehicle to substandard recovery gear that could jeopardize your safety and your vehicle. Likewise, make sure youre using the appropriate equipment for your situation.
-
NATA APPROVED LABORATORY
Fabricated to ARB specifications, tested by a NATA-approved laboratory. ARB tree protector straps are manufactured from 100% polyester webbing and feature reinforced eyes for additional durability.
ADDITIONAL RECOVERY ACCESSORIES
Snatch Block - ARB10100020A
The ARB snatch block is a formidable piece of recovery equipment that should be included in every recovery kit.
RECOVERY DAMPER - ARB220
While ARB’s winch cables and straps are exceptionally strong, it is essential that safety precautions such as fitting a recovery damper are taken.
WINCH EXTENSION - ARB725LB
An ARB winch extension strap is a lightweight non-stretch strap that is perfect for extending the length of your winch’s cable.
RECOVERY STRAP - ARB715LB
Specifically designed to stretch under load for maximum performance, snatch strap is a very effective method of extracting a bogged or immobilized 4×4
SPECIFICATIONS
Breaking strength: 26,000 lbs / 12,000 kg Length: 10 ft Width: 3" / Designed to hold firm / Material: 100% polyester Reinforced eyes: yes Eye & seam protector sleeves: yes.
NOTES TO USERS
Never wrap a winch cable around a tree. Instead use an ARB tree trunk protector to prevent damage to the tree and to your cable. Persons intending to use the strap must ensure that the strap is not damaged and in usable condition. The strap’s strength is reduced when the strap is saturated.