2007-2013 For Chevy For GMC
2013-2007 For Chevy Avalanche
2013-2007 For Chevy Silverado 1500
2014-2007 For Chevy Silverado 2500 HD
2014-2007 For Chevy Silverado 3500 HD
2013-2008 For Chevy Silverado 3500
2014 For Chevy Suburban
2013-2007 For Chevy Suburban 1500
2013-2007 For Chevy Suburban 2500
2014-2007 For Chevy Tahoe
2013-2007 For GMC Sierra 1500
2014-2007 For GMC Sierra 2500 HD
2014-2007 For GMC Sierra 3500 HD
2014-2007 For GMC Yukon
2014-2007 For GMC Yukon XL 1500
2013-2007 For GMC Yukon XL 2500
The heating function is more suitable for rain and snow days. When the mirror is heated, the heater behind the lens quickly heats the mirror surface, slowly removing rain or fog from the mirror surface. Drivers do not have to manually wipe the mirror glass manually, which also reduces the risk of driving.
This is a power mirror, you can adjust the angle of the mirror through the car power switch to maximize the field of view. This power mirror can greatly improve the drivers convenience, allowing the driver to adjust the exterior mirror without further operation due to long distances.
The turn signal is an important indicator that turns on when the vehicle turns to alert the front and rear vehicles and pedestrians. When you want to turn or change lanes, the turn signal will flash, Let other vehicles notice that you want to turn, avoid in time, and reduce the risk of collision.
The driver can adjust the optimal viewing angle of the rearview mirror according to his or her own height and driving habits. When the seat and steering wheel are adjusted for optimal comfort, then the memory can be stored. After someone else drives his or her own vehicle or is adjusted by others, the owner can easily open his memory and all related facilities will return to the optimal setting.
Step 1 - Access Roll down the window of the car. For electric mirrors, disconnect the negative battery terminal after this. Take off the screws of the door panel then take off the trim with a pry tool and and finally take off the door panel. If you have electric windows, unplug the harness. Use the nut driver to take off the nuts holding the side mirror in place and then take off it. Step 2 - Installation If it’s an electric mirror, replace the harness, checking that everything is properly hooked up. To complete the installation, screw the interior door panel back in place on the door and replace the trim. Put the negative battery cable back on the terminal and tighten properly. Put side view mirror in place so that the bolts on the mirror are through the holes in the assembly. Tighten the nuts with the nut driver until the mirror is held firmly.