About speed description:
1. Match the best results with SATA3.0 data lines
2. PCI-E must have a slot of V2.0 or more, and the speed of V1.0 will not exceed 250m, and PCI-E does not at which X1 or X16 can be a V2.0 version, there is a free X16 slot directly inserted X16 trough
3. Main board BOIS setting: SATA mode to change to AHCI, although some motherboard PCIe is a 2.0 version, but Bois default does not turn on high-speed transmission mode (Gen2 High Speed Mode) Need to be opened in PCI-E 1.0 is only 200- 250m, 2.0 below 350-400M If you do not accept the motherboard.
4. SATA port will slow down simultaneously, not suitable for users who pursue speeds, only for extended hard disk interface
|
|
|
---|---|---|
System disk and PCIE turn SATA3.0 adapter card connection condition and solution: 1. The SATA interface mode of the PCIE to SATA3.0 is an AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in the AHCI mode when installing the system on the motherboard, otherwise it is not possible Our card transfer card startup system. 2. If it is determined that the SATA interface installation system on the motherboard is in the motherboard is an AHCI mode, you can directly insert the hard disk on our card, then enter the motherboard BIOS to set the system disk to the first startup. 3. the above two conditions have, if it is still not started, or repeatedly restarted, it may be that the hard disk interface of the motherboard is conflict with our transfer card. The solution is to enter the motherboard BIOS, and set the motherboards hard disk interface option. Disabled, save the restart side energy start system |
Common tray with PCIe to SATA3.0 connection conditions and solutions: 1. When the system disk is inserted on the motherboard, the ordinary disk is inserted on the PCIe to the SATA3.0 card, then it is only necessary to start the transfer card information and the ordinary disk model. 2. such as 1 condition is established, or unable to start the system, then enter the motherboard BIOS, set the system disk to the first startup. |
System Dish and Normal Put and PCIE Turn SATA3.0 Connection and Solution: 1. Prerequisitation, if the system is equipped with the original main board installed, it can be implemented using the following measures. If it is an IDE mode installed system, then it can only be reinstalled by PCIe to SATA3.0. . 2. After the establishment of 2,1 conditions, it is not possible to start the main board BIOS and set the system disk as the first start. 3. 1.2 is satisfied, or you cant start, then it may be an integrated SATA interface conflict, please enter the motherboard BIOS to set the SATA to disabled |
With Amazon as a platform, I created Heayzoki to bring many good quality and inexpensive products to the United States.