Feature

●Magnetic gauge the Camber and Caster angle on the wheel hub or brake disc
●Suitable for accurate checking of the castor and camber angle
●Has a simple leveling adjustment from -5 degrees to 5 degrees
●With two positioning blisters
●Allows adjustment to maintain correct wheel alignment and even tyre wear


Description

Feature:
This adjustable equipment allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.
Time and money saving device.
Easy to read and convenient to operate.

Package Content:
1 x Magnetic Alignment Camber Castor Gauge

How to use:
1. Remove the wheel alignment sensor (Clip tool), remove the tire;
2, The magnetic level gauge carefully on the side of the suction wheel disc brakes;
3, the water level was adjusted to zero;
4, install the required location specific parts;
5, use a special tool, with the degree of magnetic level gauge indication, adjust the positioning of the part to the desired measurement angle.
6, retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)